Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

LMK05028RGCR is a high-performance network synchronizer clock device that provides jitter cleaning, clock generation, advanced clock monitoring, and superior hitless switching performance to meet the stringent timing requirements of communications infrastructure and industrial applications. The device's low jitter and high PSNR reduce bit error rates (BER) in high-speed serial links.

Feature

Two Independent PLL Channels Featuring:

Jitter: 150-fs RMS for Outputs ≥ 100 MHz

Phase Noise: –112 dBc/Hz at 100-Hz Offset for 122.88 MHz

Hitless Switching: 50-ps Phase Transient With Phase Cancellation

Programmable Loop Bandwidth With Fastlock

Standards-Compliant Synchronization and Holdover Using a Low-Cost TCXO/OCXO

Any Input to Any Output Frequency Translation

Four Reference Clock Inputs

Priority-Based Input Selection

Digital Holdover on Loss of Reference

Eight Clock Outputs With Programmable Drivers

Up to Six Different Output Frequencies

EEPROM/ROM for Custom Clocks on Power-Up

Flexible Configuration Options

1 Hz (1 PPS) to 750 MHz on Input and Output

Zero Delay for Deterministic Phase Offset

Robust Clock Monitoring and Status

I2C or SPI Interface

Excellent Power Supply Noise Rejection (PSNR)

3.3-V Supply With 1.8-V, 2.5-V, or 3.3-V Outputs

Industrial Temperature Range: –40°C to +85°C

Applications

Telecom and Enterprise Line Cards

Wireless Base Station (BTS), Wireless Backhaul

Test and Measurement, Broadcast Infrastructure,and Medical Ultrasound

Jitter and Wander Attenuation, Precise FrequencyTranslation, and Low-Jitter Clock Generation for FPGA, DSP, ASIC, and CPU Devices

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.