sales@hkmjd.com
Service Telephone:86-755-83294757
Trade Name:MCS1802GS-05
Data Manual:MCS1802GS-05.pdf
Brand:MPS
Particular Year:23+
Package:8-SOIC
Delivery Date:New original
Stock: 2000pcs
The MCS1802GS-05 is a ±5A linear Hall effect current sensor for AC or DC current sampling. The Hall sensor array is differential and can cancel out any stray magnetic field. The MCS1802 primary conductor with low resistance allows current to flow close to the IC, which contains a high-precision Hall effect sensor. This current generates a magnetic field, which is detected by an integrated Hall effect sensor at two different points. The magnetic field difference between these two points is then converted into a voltage proportional to the applied current. The rotating current technique is used for low and stable migration.
peculiarity
•3.3V single power supply
• Through differential detection, it is not affected by external magnetic fields
•2.2kVrms minimum isolation voltage
• Operating temperature: -40°C to +125°C
•0.9MΩ internal conductor resistance
•±5A to ±50A bidirectional range
• Adjustable bandwidth up to 100kHz
•4μs output rise time
• Proportional output of the supply voltage
• The output is proportional to AC or DC current
• Factory adjustment accuracy
• No hysteresis
• SOIC-8 package
Typical applications:
• Motor control
• Automotive Systems
• Load detection and management
• Switching mode power supply
• Overcurrent fault protection
Model
Brand
Package
Quantity
Describe
TI
SOIC-10
1000
80ARMS 500kHz Hall-effect current sensor with AFR, reference and ALERT
TI
SOIC-10
1000
80ARMS 500kHz Hall-effect current sensor with AFR, reference and ALERT
TI
SOIC-10
1000
80ARMS 500kHz Hall-effect current sensor with AFR, reference and ALERT
TI
SOIC-10
1000
80ARMS 500kHz Hall-effect current sensor with AFR, reference and ALERT
A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.
A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.
A: at present, our self-employed brands TI,ST,ADI,NXP,LATTICE,CYPRESS,INFINEON,XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.
A: You can inquire through the website, or by phone and email.
A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.
A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.
Monolithic Power Systems (MPS) is a high-performance analog semiconductor company headquartered in San Jose, California. Founded in 1997, the company has three core strengths; deep system-level and application knowledge, strong analog design expertise…
MP18831-A4CGY
MP18831-A4CGY - Isolated, Dual-Input Control, High-Side/Low-Side Half-Bridge Gate DriverMP18831-A4CGY - Product Description:MP18831-A4CGY is an isolated, half-bridge gate driver solution with up to 4A of source and sink peak current capability. The ga…MPQ4341GLE-33-AEC1
MPQ4341GLE-33-AEC1 - 36V, 5A, Ultra-Low Quiescent Current, Synchronous Step-Down Converter with Multi-Phase CapabilityMPQ4341GLE-33-AEC1 - Product Description:MPQ4341GLE-33-AEC1 is a configurable-frequency (350kHz to 2.5MHz), synchronous step-down swi…MP4835AGRD
MP4835AGRD - 32-Channel High-Voltage Single-Pole, Single-Throw (SPST) Analog SwitchProduct OverviewsMP4835AGRD is a single-pole, single-throw (SPST) analog switch with integrated output bleed resistors. The output switches of the MP4835A are controlle…MPQ6615GQKTE-AEC1
MPQ6615GQKTE-AEC1 - 40V, 8A, H-Bridge DC Motor DriverProduct OverviewsMPQ6615GQKTE-AEC1 is an H-bridge DC motor driver. The H-bridge consists of four N-channel power MOSFETs. The on resistance (RDS(ON)) of each MOSFET is 11mΩ when the junction temper…MP4864AGBD
MP4864AGBD SPST Analog Switch is a 64-channel, high-voltage, single-pole single-throw (SPST) analog switch that includes integrated output bleed resistors intended for medical ultrasound imaging applications. FeatureNo high-voltage supplies required64…MP6632GR
MP6632GR - Three-Phase BLDC Motor DriversProduct OverviewsMP6632GR Three-Phase Brush Less DC (BLDC) Motor Drivers feature up to 1A of driving current and a 6V to 50V input voltage (VIN) range. These motor drivers offer built-in, configurable speed cur…Contact Number:86-755-83294757
Enterprise QQ:1668527835/ 2850151598/ 2850151584/ 2850151585
Business Hours:9:00-18:00
E-mail:sales@hkmjd.com
Company Address:Room1239, Guoli building, Zhenzhong Road, Futian District, Shenzhen, Guangdong
CopyRight ©2022 Copyright belongs to Mingjiada Yue ICP Bei No. 05062024-12
Official QR Code
Links: