Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

The SC2010AQDER SC2010A is a highly integrated USB PD controller. It is compliant with the latest USB Type-C and PD 3.0 and supports the most popular high voltage fast charging protocols with up to 3 sets of DPDM interfaces.The SC2010 is suitable for adapters, mobile phone chargers, car chargers and mobile power supplies.The SC2010 is rated at 30V. The SC2010 reduces external components by integrating USB PD baseband physical layer (PHY), Type-C detection, voltage and current detection, 10-bit high performance ADC, PWM output to regulate VBUS, up to 2 N_MOS drivers, VBUS drain circuit, I2C interface and protection circuitry. The embedded 32-bit high performance microcontroller offers 32k bytes of OTP, providing a cost effective solution for many applications. Various protection mechanisms are supported, including over-voltage protection, over-current protection, short-circuit protection, over-temperature protection, DP/DM pin overvoltage protection and CC pin overvoltage protection, effectively ensuring stable and reliable system operation.

Features

● USB Type-C port

    Supports Type-C DRP protocol

    Configurable RP and RD

    Rd support when dead battery

● USB Power Distribution (PD)

    Support for DFP / UFP/ DRP USB 3.0 PD

    Hardware BMC transmitter and receiver

    Full physical layer functionality

    Hardware CRC

    Hardware reset

    Integrated PD 3.0 protocol

    SOP ' support, E-marker compatible

●  3 DPDM fast charging ports

    3 software-controlled DPDM ports

    Supports Apple Charge, BC1.2, DCP, HVDCP, FC, AFC, FCP.SCP, VOOC, UART, and other dedicated charging protocols

● Power supply

    Wide voltage operating range from 2.7V to 24.5V (up to 30V)

● Microcontroller subsystem

    Integrated CPU

    32 KB OTP and 1 KB RAM

    Supports I2C interface and multiple I/O ports

● Analogue module

    PWM voltage regulation

    Up to 8 input channels 10-bit ADC for monitoring voltage/current/external signals

    Integrated current sampling op-amp

    Integrated isolated N_MOS driver

    Integrated VBUS drain path at both ends of isolated MOS

    Built-in NPN driver for VCC stabilisation

● Protection

    Chip OVP, DPDM OVP, CC OVP

    VBUS to CC / DPDM short circuit protection

    GND to CC / DPDM short circuit protection

● Available in 4mm x 4mm QFN-32 package

Applications

● Mobile power

● Notebooks, tablet PCs

● Other fast charging devices

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.