Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

MAX18002AWT is an ultrasonic, high-performance boost converter with an input voltage range of 0.5V to 5.5V and a switching current limit of 3.6A. The IC operates in ultrasonic mode (USM) (FSW at 29kHz typ) at low loads and transitions into skip mode and continuous conduction mode (CCM) of operation at higher load currents.

Benefits and Features

0.5V to 5.5V Input Voltage

1.8V Minimum Start-Up Voltage

2.5V to 5.5V (in 100mV Steps) Output Voltage

3.6A Cycle-by-Cycle Inductor Current Limit

Automatic Pass-Through Mode when VIN > VOUT

Ultrasonic Mode (FSW at 29kHz typ) to Alleviate Acoustic Audible Interference for Light-Load Operation

True-Shutdown Mode

- 7nA Shutdown Current

- Output Disconnects from Input Without Forward or Reverse Current

Output Short-Circuit Protection

Thermal-Shutdown Protection

95% Peak Efficiency (3.6VIN, 5VOUT)

1.07mm x 1.57mm, 0.5mm Pitch, 6-Bump WLP

-40°C to +125°C Operating Temperature Range

Key Applications

Wearable Applications

IoT Applications

Battery-Powered Applications

Portable Devices

Metering Applications

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.