sales@hkmjd.com
Service Telephone:86-755-83294757
Trade Name:ADA4523-1BCPZ
Data Manual:ADA4523-1BCPZ.pdf
Brand:ADI
Particular Year:23+
Package:LFCSP-8
Delivery Date:New and Original
Stock: 2500pcs
The ADA4523-1BCPZ is a high-voltage, low-noise, zero-drift operational amplifier that delivers precision DC performance over a wide 4.5 V to 36 V supply range. The offset voltage and 1/f noise are suppressed, enabling the amplifier to achieve an offset voltage of ±4 µV maximum and an input noise voltage of 88 nV p-p (typical) from 0.1 Hz to 10 Hz. The ADA4523-1's self-calibration circuitry features low offset voltage drift at a temperature of 0.01 µV/°C (maximum) as well as time-varying zero drift. In addition, the ADA4523-1 utilises on-chip filtering to achieve high immunity to electromagnetic interference (EMI).
Features
Supply voltage range: 4.5 V to 36 V
Offset voltage: ±4 µV (maximum, at 5 V)
Offset voltage drift: 0.01 µV/°C (max. at 5 V)
Input noise
Voltage: 88 nV p-p (0.1 Hz to 10 Hz, typical)
Spectral density voltage: 4.2 nV/√Hz (1 kHz, typical)
Rail-to-rail output
Unit gain stabilisation
GBP: 5 MHz (typical)
Voltage-swing rate: 1.8 V/μs (typical, falling)
PSRR: 168 dB (typical, VS = 4.5 V to 36 V)/li>
Open-loop voltage gain: 160 dB (typical, VOUT = -14.75 V to +14.75 V, RL = 10 kΩ, VS = 30 V)
CMRR: 160 dB (typical, VCM = -15.1 V to +13.5 V, VS = 30 V)
Integrated EMI filter
Shutdown mode
Ground detection
Applications
High-resolution data acquisition
Reference Voltage Source Buffering
Test and Measurement
Electronic Scales
Thermocouple Amplifiers
Strain Gauges
Low Side Current Detection
Model
Brand
Package
Quantity
Describe
ADI
LFCSP-8
3000
Precision, ultra-low noise, rail-to-rail input/output, zero drift single-channel operational amplifier
ST
8-SOIC
2000
Circuit breaker (zero drift) Amplifier 2 circuit single-ended, rail to rail 8-SO
ST
8-SOIC
2000
Circuit breaker (zero drift) Amplifier 2 circuit single-ended, rail to rail 8-SO
ST
8-MiniSO
2000
High precision (20µV) circuit breaker (zero drift) Amplifier 2 circuit single-ended, rail to rail 8-MiniSO
A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.
A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.
A: at present, our self-employed brands TI,ST,ADI,NXP,LATTICE,CYPRESS,INFINEON,XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.
A: You can inquire through the website, or by phone and email.
A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.
A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.
The full name of Analog Devices is Analog Devices, Inc. (ADI). As an outstanding supplier specializing in semiconductor sensors and signal processing ICs, adi regards innovation, performance and excellence as the cultural pillars of the company and ha…
LT6658AHDE-1.2
The LT6658AHDE-1.2 is a precision dual-output reference voltage source device that combines the performance of a precision reference voltage source with that of a linear regulator (which we call a Refulator™). Even with heavy loads, the two outputs a…ADR1399KEZ
The ADR1399KEZ precision shunt reference offers excellent temperature stability across a wide range of voltage, temperature, and quiescent current conditions.ADR1000AHZ
The ADR1000AHZ is a 6.62 V, highly stable output, oven-controlled, embedded Zener reference component built on ADIs proprietary bipolar process, and is a pin-compatible replacement for the LTZ1000.LTC6602IUF
The LTC6602IUF is housed in a 24-pin QFN-EP (4mm 4mm) package and is an integrated chip combining a matched high-frequency bandpass/low-pass filter with a differential driver, specifically designed for applications requiring precise filtering and sig…LTC6602CUF
The LTC6602CUF is a dual-channel, matched, programmable bandpass or lowpass filter and differential driver.LT6604CUFF-2.5
The LT6604CUFF-2.5 device incorporates two matched fully differential amplifiers, each with a fourth-order, 2.5MHz low-pass filter.Contact Number:86-755-83294757
Enterprise QQ:1668527835/ 2850151598/ 2850151584/ 2850151585
Business Hours:9:00-18:00
E-mail:sales@hkmjd.com
Company Address:Room1239, Guoli building, Zhenzhong Road, Futian District, Shenzhen, Guangdong
CopyRight ©2022 Copyright belongs to Mingjiada Yue ICP Bei No. 05062024-12
Official QR Code
Links: