Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

PIC16F18044T-I/ML Microcontrollers feature an array of digital and analog peripherals for cost-sensitive sensor and real-time control needs. The PIC16F180 has a memory range of 3.5KB to 28KB or speeds of up to 32MHz and is housed in 8- to 44-pin packages. The microcontrollers have a 10-bit analog-to-digital converter with computation, automated capacitive voltage divider techniques, and an 8-bit digital-to-analog converter module.

Features

C compiler-optimized RISC architecture

Operating speed

DC 32MHz clock input

125ns minimum instruction time

16-level deep hardware stack

Low-current Power-on Reset (POR)

Configurable Power-up Timer (PWRT)

Brown-out Reset (BOR)

Up to 28KB of program flash memory

Up to 2KB of data SRAM memory

Up to 256Bytes of data EEPROM memory

Rising and falling edge dead-band control

Full-bridge, half-bridge, and 1-channel drive

Multiple signal sources

Programmable dead band

Fault-shutdown input

One configurable 8/16-bit timer (TMR0)

Two 16-bit timers (TMR1/3) with gate control

Three 8-bit timers (TMR2/4/6) with Hardware Limit Timer (HLT)

Up to 35 I/O pins

One input-only pin

Individual I/O direction, open drain, input threshold, slew rate, and weak pull-up control

Interrupt-on-Change (IOC) on up to 25 pins

One external interrupt pin

Applications

Cost-sensitive sensors

Real-time control 

Capacitive touch sensing

Waveform control

Communication peripherals

Advanced capacitive touch sensing

Analog-to-digital conversion

Digital-to-analog conversion

Low-power applications

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.