Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

sales@hkmjd.com

英banner
Shenzhen  Mingjiada Electronics Co., Ltd.

Service Telephone:86-755-83294757

Product Classification

AI Processor Chip

AI Accelerators

Home /Company Dynamics /

TX08DACP (TI) A transmitter solution for ultrasound imaging systems

TX08DACP (TI) A transmitter solution for ultrasound imaging systems

Source:our siteTime:2024-11-27Views:

The TX08DACP is an RF transmitter with 8 linear amplifiers and DACs, a 5-stage pulser, a T/R switch, and an on-chip beamformer.

TX08DACP 8-channel ultrasonic transmitter

Features:

• 8-channel transmitter, each channel includes:

- Five-stage pulse generator with on-chip beamforming function

- Active T/R switch

- Integrated floating power supply

• Five-stage pulse generator support:

- Maximum output voltage: ±100V

- Minimum output voltage: ±1V

- Maximum output current: 2A

- Supports 4A output current mode

- Truly zero to discharge to the ground

- The second harmonic is -45 DBC at 5MHz frequency

- 3dB bandwidth and 220Ω || 240pF load

• -20MHz (for ±100V power supply)

• 35MHz (4A current for ±100V supply)

- Integrated jitter: 100fs (100Hz to 20kHz)

- CW mode near phase noise: -154DBC /Hz (for 5MHz signal, 1kHz offset)

• Active T/R switches with:

- On-resistance: 8 ohms

- On-off time: 300ns

- Channel based T/R switch control

• On-chip beamforming devices for pulse generators are:

- Channel based T/R switch control

- Delay resolution: half a beamforming clock cycle, not less than 1.56ns

- Maximum delay: 214 beamforming clock cycles

- 960 x 32-bit memory per channel for storing waveform and delay values.

• High speed (maximum 400MHz) dual channel LVDS serial programming interface

- Low programming time: < 500ns (for delay distribution updates)

- 32-bit checksum function detects incorrect SPI writes

• Internal temperature sensor and automatic thermal shutdown

• No specific power timing required

• Error flag register, used to detect multiple fault conditions

• Integrated passive devices for floating power supply and bias voltage

• Small package: FCCSP-196 (12mm x 12mm) with 0.8mm pitch

封装.png



Instructions:

The TX08DACP is an RF transmitter with 8 linear amplifiers and DACs, a 5-stage pulser, a T/R switch, and an on-chip beamformer.


Texas Instruments TX08D is a transmitter solution for ultrasonic imaging systems. The device supports eight channels, each including a pulse generator transmit/receive (T/R) switch.


Applications:

• Ultrasonic pulse generator imaging system

• Piezoelectric actuator


Company Introduction
About Us
News Information
Honorary Qualification
Inventory Query
Classification Query
Supplier Query
Help Center
Online Inquiry
Common Problem
Site Map
Contact us

Contact Number:86-755-83294757

Enterprise QQ:1668527835/ 2850151598/ 2850151584/ 2850151585

Business Hours:9:00-18:00

E-mail:sales@hkmjd.com

Company Address:Room1239, Guoli building, Zhenzhong Road, Futian District, Shenzhen, Guangdong

CopyRight ©2022 Copyright belongs to Mingjiada   Yue ICP Bei No. 05062024-12

Official QR Code

Brand Index:

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9

Links:

skype:mjdsaler