Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

sales@hkmjd.com

英banner
Shenzhen  Mingjiada Electronics Co., Ltd.

Service Telephone:86-755-83294757

Product Classification

AI Processor Chip

AI Accelerators

Home /Company Dynamics /

TPS25810TWRVCRQ1 Automotive USB Type-C™ DFP controller and power switch with load detection

TPS25810TWRVCRQ1 Automotive USB Type-C™ DFP controller and power switch with load detection

Source:本站Time:2024-01-22Views:

Shenzhen Mingjiada Electronics Co., LTD. (Recycling) (supply) TPS25810TWRVCRQ1 Automotive USB Type-C™ DFP controller and power switch with load detection function.Device description:The TPS25810TWRVCRQ1 is a USB Type-C Downlink Data port (DFP) contro…

Shenzhen Mingjiada Electronics Co., LTD. (Recycling) (supply) TPS25810TWRVCRQ1 Automotive USB Type-C™ DFP controller and power switch with load detection function.


Device description:

The TPS25810TWRVCRQ1 is a USB Type-C Downlink Data port (DFP) controller that integrates a USB power switch rated at 3A current. The TPS25810-Q1 device monitors the Type-C Configuration channel (CC) line to determine when a USB device is connected to it. If connected to an uplink data port (UFP) device, the TPS25810-Q1 can apply power to the VBUS and transfer the optional VBUS pull current capability to the UFP over a CC line. If the UFP is connected using an electrically marked cable, the TPS25810‑Q1 device can also apply a VCONN power supply to the CC pin of the cable. The TPS25810-Q1 device also recognizes when a Type-C audio or debug attachment is connected.


The TPS25810-Q1 34mΩ power switch is available in two fixed current limits corresponding to Type-C current levels. The FAULT output signals when the switch is in overcurrent and overheat conditions. The LD_DET output controls the power management of multiple high-current Type-C ports in environments where all ports cannot provide high current (3A) at the same time.


Applications

• Automotive infotainment systems

• USB charging in the rear seat


Features

• Compatible with USB Type-C version 1.2 downlink Data port (DFP) controllers

• Connector connection or disconnection detection

• Configure channel (CC) STD, 1.5A, 3A current capability announcements

• Ultra-high speed polarity determination

• VBUS application and discharge

• VCONN is used in electronic marking cables

• Audio and debug attachment identification

• When the port is not connected, the typical IDDQ value is 0.7µA

• Three input power options

- IN1: USB charging power supply

- IN2: VCONN power supply

- AUX: device power supply

• Power Wake up ensures low power consumption during system hibernation (S4) and shutdown (S5) power states

• 34mΩ (typical value) High-side metal-oxide-semiconductor field-effect transistor (MOSFET)

1.7A or 3.4A programmable ILIM (±7.1%)

• Port power management Optimizes power resources for multiple ports

• Package: 20-pin wafer-level square flat Leadless (WQFN) package (3mm x 4mm) (1)

简化原理图.png

If necessary, please contact Mr. Chen;

Tel: +8613410018555

Email: sales@hkmjd.com

Official website: www.hkmjd.com


Company Introduction
About Us
News Information
Honorary Qualification
Inventory Query
Classification Query
Supplier Query
Help Center
Online Inquiry
Common Problem
Site Map
Contact us

Contact Number:86-755-83294757

Enterprise QQ:1668527835/ 2850151598/ 2850151584/ 2850151585

Business Hours:9:00-18:00

E-mail:sales@hkmjd.com

Company Address:Room1239, Guoli building, Zhenzhong Road, Futian District, Shenzhen, Guangdong

CopyRight ©2022 Copyright belongs to Mingjiada   Yue ICP Bei No. 05062024-12

Official QR Code

Brand Index:

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9

Links:

skype:mjdsaler