Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

The TJA1462AT CAN Signal Improvement Capability (SIC) transceiver with standby mode is part of the TJA146x transceiver family, which implements the CAN SIC as defined in ISO 11898-2:2024, 3rd ed. The TJA1462AT complies with ISO 11898-2:2024 and the CAN physical layer defined in SAE J2284-(1-5). The TJA1462AT conforms to the CAN physical layer defined in ISO 11898-2:2024 and SAE J2284-(1-5) and is fully interoperable with high-speed classic CAN and CAN FD.

CAN signalling improvements significantly reduce signal ringing on the network, allowing CAN FD communications to operate reliably at 5 Mbit/s in larger topologies. In addition, the TJA1462AT features tighter bit timing symmetry, enabling CAN FD communication at speeds up to 8 Mbit/s.

TJA1462AT General Features

Conforms to ISO 11898-2:2024, SAE J2284-1 to SAE J2284-5, and SAE J1939-14 standards.

CAN FD communication speed up to 8 Mbit/s

VIO input for connection to 3.3 V to 5 V microcontrollers (TJA1462A)

Low electromagnetic emission (EME) and high electromagnetic immunity (EMI)

AEC-Q100 Level 1 certification

Available in SO8 and leadless HVSON8 packages

Signal improvements

Significantly reduces signal ringing in the network with CAN signal improvement as defined in CiA 601-4

Tighter bit timing symmetry provides more time to reduce signal ringing

Predictable fail-safe behaviour

Undervoltage detection with defined processing for all power pins

Guaranteed full functionality from undervoltage detection threshold to maximum limiting voltage value

Defined behaviour below the undervoltage detection threshold

Transceiver off bus when supply voltage falls below undervoltage threshold (high impedance)

Internal biasing of TXD and mode select input pins for defined fail-safe behaviour

TJA1462AT Applications

Automotive

Diesel engine management

Service-oriented gateways

Tyre pressure monitoring systems (TPMS)

Industrial

Brushless DC Motor (BLDC) Control

Data bus and battery management

Motion Control and Robotics

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.