sales@hkmjd.com
Service Telephone:86-755-83294757
Trade Name:Operational Amplifiers
Brand:ADI
Particular Year:25+
Package:DFN-14
Delivery Date:New and Original
Stock: 5000pcs
The LT1997IDF-3 combines a precision operational amplifier with highly matched resistors to form a single-chip solution for accurate voltage amplification. The LT1997-3 is particularly well suited for use as a differential amplifier, with excellent resistor matching resulting in a common-mode rejection ratio of greater than 91 dB. The amplifier has a maximum input offset voltage of 60 μV and a -3 dB bandwidth of 1.1 MHz (gain = 1).
The LT1997IDF-3 can operate from any supply voltage from 3.3V to 50V with a supply current of only 350μA. Output fluctuations are typically within 100mV of either supply rail.
The resistors maintain excellent matching performance over temperature; the temperature coefficient of match is guaranteed to be less than 1ppm/°C. Resistor-to-voltage linearity is extremely high, with gain nonlinearity of less than 2ppm.
LT1997IDF-3 Features
Pin configurable as a differential, inverting, or in-phase amplifier
91dB minimum DC CMRR (gain = 1)
65dB AC CMRR (at 100kHz, gain = 1)
0.006% (60ppm) Maximum Gain Error (Gain = 1)
1ppm/°C Maximum Gain Error Drift
2ppm Maximum gain non-linearity
±160V common mode voltage range
Wide supply voltage range: 3.3V to 50V
Rail-to-rail output
350µA supply current
60µV Maximum op amp offset voltage
1.1MHz -3dB bandwidth (gain = 1)
Low-power shutdown mode: 20µA
Applications
HV or LV side current sensing
Bi-directional wide common-mode range current detection
High-voltage to low-voltage level conversion
Industrial data acquisition front-ends
Replacement isolation circuits
Differential to single-ended conversion
Model
Brand
Package
Quantity
Describe
TI
VSSOP-8
2000
36V 5MHz Low-Noise Zero-Drift MUX-Friendly Precision Operational Amplifiers
ADI
8-SOIC
2000
Dual 55V, EMI Enhanced, Zero Drift, Ultralow Noise, Rail-to-Rail Output Operational Amplifiers
ADI
MSOP-8
2000
Dual 55V, EMI Enhanced, Zero Drift, Ultralow Noise, Rail-to-Rail Output Operational Amplifiers
A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.
A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.
A: at present, our self-employed brands TI,ST,ADI,NXP,LATTICE,CYPRESS,INFINEON,XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.
A: You can inquire through the website, or by phone and email.
A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.
A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.
The full name of Analog Devices is Analog Devices, Inc. (ADI). As an outstanding supplier specializing in semiconductor sensors and signal processing ICs, adi regards innovation, performance and excellence as the cultural pillars of the company and ha…
LTM4654IY
The LTM4654IY is a DC/DC step-down μModule power module launched by ADI. It is a four-channel regulator designed to provide an output current of up to 25A within an input voltage range of 20V to 55V. Its technical features are as follows:Input voltag…LTM4654EY
The LTM4654EY hybrid step-down Module bus converter is a complete 300W output pull-up/potting current switching mode hybrid topology step-down DC-DC power μModule (micro module) bus converter. The LTM4654EY is designed to provide an output current of…LTM4707IY
The LTM4707IY is a complete 16A step-down Silent Switcher 3 power μModule regulator in a tiny 6.25mm 6.25mm 5.07mm BGA package. This package contains a switch controller, power MOSFET, inductor and supported components.CharacteristicsProvide comple…AD9528BCPZ
The AD9528BCPZ is a two-stage PLL with an integrated JESD204B/JESD204C SYSREF generator, which can be used for multi-device synchronization. Its technical parameters are as follows:PLL: With bypassInput: CMOS, HSTL, LVDSOutput: HSTL, LVDSNumber of cir…AD9522-5BCPZ
The AD9522-5BCPZ is a highly CMOS output clock generator launched by (ADI), integrating a VCO, clock divider, and up to 24 outputs. It supports automatic hold and flexible reference input circuits, making it suitable for scenarios that require high-pr…AD9549ABCPZ
The AD9549ABCPZ device provides synchronization for many systems, including synchronous fiber optic networks (SONET/SDH). The AD9549ABCPZ can generate an output clock synchronized with one of the two external input references. The external reference m…Contact Number:86-755-83294757
Enterprise QQ:1668527835/ 2850151598/ 2850151584/ 2850151585
Business Hours:9:00-18:00
E-mail:sales@hkmjd.com
Company Address:Room1239, Guoli building, Zhenzhong Road, Futian District, Shenzhen, Guangdong
CopyRight ©2022 Copyright belongs to Mingjiada Yue ICP Bei No. 05062024-12
Official QR Code
Links: