sales@hkmjd.com
Service Telephone:86-755-83294757
Trade Name:Hot Swap Controller
Brand:Maxim
Particular Year:25+
Package:WLP-16
Delivery Date:New and Original
Stock: 2000pcs
The MAX15096GWE devices are integrated solutions for hot-swap applications that require the safe insertion and removal of circuit line cards from powered backplanes. They can also be used as electronic circuit breakers for hard disc drives, solid state drives, and fans. These devices integrate a hot-swap controller, 12mΩ (typical) power MOSFET, and electronic circuit breaker protection in a single package.
The devices are designed to protect from 2.7V to 18V supply voltage. The devices implement foldback current limiting during startup to control inrush current, reduce di/dt, and keep the MOSFETs in safe operating area (SOA) conditions. After the startup cycle, an on-chip comparator provides VariableSpeed/BiLevel™ protection against short-circuit and overcurrent faults, as well as protection against system noise and load transients. In the event of a fault, the load is disconnected. The device is factory calibrated to provide accurate overcurrent protection with ±10% accuracy.
Product Attributes
Type: Hot Swap Controller
Number of Channels: 1
Internal Switch: Yes
Application: General Purpose
Features: Auto Retry, Fault Timeout, Latching Faults
Programmable Features: Circuit Breaker, Current Limit, OVP, Slew Rate, UVLO
Voltage - Supply: 2.7V ~ 18V
Current - Output (Max): 6A
Operating Temperature: -40°C ~ 105°C
Current - Supply: 580 µA
Mounting Type: Surface Mount
Package/Housing: 16-WFBGA, WLBGA
Supplier Device Package: 16-WLP
Applications
Blade servers
Server I/O cards
RAID systems
Disk drive power supplies
Storage Applications
Industrial Applications
Model
Brand
Package
Quantity
Describe
ADI
LFCSP-32
3000
Hot-Swap Controller and Digital Power and Energy Monitor with PMBus Interface
ADI
LFCSP-32
3000
Hot-Swap Controller and Digital Power and Energy Monitor with PMBus Interface
ADI
LFCSP-32
3000
Hot-Swap Controller and Digital Power and Energy Monitor with PMBus Interface
TI
24-VFQFN
3000
Integrated Hot-Swap with Accurate Load Current Monitoring and Adjustable Transient Fault Management
TI
24-VFQFN
3000
Integrated Hot-Swap with Accurate Load Current Monitoring and Adjustable Transient Fault Management
TI
24-VQFN
3000
Smart eFuse - Integrated Hot-swap Protection With Adjustable Transient Fault Management
A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.
A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.
A: at present, our self-employed brands TI,ST,ADI,NXP,LATTICE,CYPRESS,INFINEON,XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.
A: You can inquire through the website, or by phone and email.
A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.
A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.
Maxim was founded in 1983 and is headquartered in California, USA. The company is a leader in the design, development, and production of linear and mixed-signal integrated circuit products. As of June 26, 1999, its net sales revenue has reached 600 mi…
MAX17509ATJ
The MAX17509ATJ is a dual 3A high-efficiency synchronous step-down DC-DC converter with 4.5V to 16V input voltage range that supports resistor programming. This device can be configured as two independent 3A power supplies or one dual-phase 6A powe…MAX17559ACJ
The MAX17559ACJ is a dual-output, synchronous step-down controller used to drive NMOSFETs. This device adopts peak current control mode and fixed frequency architecture.Technical SpecificationOutput type: Transistor driverFunction: Lower blood pressur…MAX6749KA
The MAX6749KA is a low-power, microprocessor (P) monitoring circuit designed to monitor single- or dual-supply system voltages ranging from 1.575V to 5V, providing stable reset output and watchdog functionality.MAX9724BETC
The MAX9724BETC is a low-power, high-performance stereo headphone amplifier from Maxim that uses DirectDrive technology and is suitable for portable audio devices.MAX1556ETB
The MAX1556ETB is a low-current (16A), fixed-frequency buck regulator.MAX33049EASD
The MAX33049EASD is a 40kV ESD-protected full-duplex RS-485/RS-422 transceiver with an operating voltage range of 3.0V to 5.5V. It is designed flexibly and supports robust communication up to 20Mbps.The MAX33049EASD transceiver is optimized for robust…Contact Number:86-755-83294757
Enterprise QQ:1668527835/ 2850151598/ 2850151584/ 2850151585
Business Hours:9:00-18:00
E-mail:sales@hkmjd.com
Company Address:Room1239, Guoli building, Zhenzhong Road, Futian District, Shenzhen, Guangdong
CopyRight ©2022 Copyright belongs to Mingjiada Yue ICP Bei No. 05062024-12
Official QR Code
Links: