Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

The miClockSynth ZL30264LDF1 high-performance, any-rate multiplier and clock generator simplifies board design by generating ultra-low-jitter clock signals from a single crystal or crystal oscillator while generating additional independent frequency families.

Features Of ZL30264LDF1

The two APLLs have fractional dividers and integer dividers to make four independent frequency families

Four Flexible Input Clocks: One crystal/CMOS input, Two differential/CMOS inputs, One single-ended/CMOS input

Any input frequency from 9.72MHz to 1.25GHz (300MHz max for CMOS)

Activity monitors, automatic or manual switching

Glitch-less clock switching by pin or register

6 Any-Frequency, Any-Format Outputs

Any output frequency from 1Hz to 1045MHz

High-resolution frac-N APLL with 0ppm error

Output jitter from integer multiply and dividers as low as 0.17ps RMS (12kHz-20MHz)

Output jitter from fractional dividers is typically < 1ps RMS, many frequencies <0.5ps RMS

Each output has an independent divider and is configurable as LVDS, LVPECL, HCSL, 2xCMOS or HSTL

In 2xCMOS mode, the P and N pins can be different frequencies (e.g. 125MHz and 25MHz)

Multiple output supply voltage banks with CMOS output voltages from 1.5V to 3.3V

Precise output alignment circuitry and per-output phase adjustment

Per-output enable/disable and glitch-less start/stop (stop high or low)

Automatic self-configuration at power-up from external EEPROM (see ZL30265 for internal EEPROM); up to 8 configurations pin-selectable

External feedback for zero-delay applications

Numerically controlled oscillator mode

Spread-spectrum modulation mode

Generates PCIe 1, 2, 3, 4, 5 & 6 compliant clocks

Easy-to-configure design requires no external VCXO or loop filter components

SPI or I2C processor Interface

Core supply voltage options: 2.5V only, 3.3V only, 1.8V+2.5V or 1.8V+3.3V

Space-saving 8x8mm QFN56 (0.5mm pitch)

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.