sales@hkmjd.com
Service Telephone:86-755-83294757
Trade Name:A4964KEVTR-J
Data Manual:A4964KEVTR-J.pdf
Brand:Allegro
Particular Year:23+
Package:QFN-36
Delivery Date:New and Original
Stock: 3000pcs
The A4964KEVTR-J is a three-phase, sensorless, brushless DC (BLDC) motor controller for use with external N-channel power MOSFETs and is specifically designed for automotive applications. It is designed to provide the motor control functions in a system where a small microcontroller provides the communication interface to a central ECU and intelligent fault and status handling. The A4964 provides the supply and watchdog for the microcontroller and the high-voltage interfaces between the microcontroller and the central ECU and ignition switch. The A4964 can also operate as an independent singlechip remote motor controller.
Features and benefits
• Three-phase sensorless BLDC motor control FET driver
• Three-phase sinusoidal drive with soft start
• Sensorless start-up and commutation
• Windmill detection and synchronization
• Bootstrap gate drive for N-channel MOSFET bridge
• 5.5 to 50 V supply range
• SPI-compatible interface
• Programmable control modes: speed, voltage, current
• Peak current limiting
• Control via SPI or PWM
• Programmable gate drive for slew rate control
• LIN / PWM physical interface with wake
• Logic supply regulator with current limit
• MCU watchdog and reset
• Ignition switch interface
• Diagnostics, status, current, and speed feedback
Applications
• Automotive fuel, oil, and urea pumps
• Automotive fans and blowers
Model
Brand
Package
Quantity
Describe
Maxim
TSSOP-38
3000
65V, 3.8A stepper motor driver with integrated current detection and 128 microstep divider
Maxim
TSSOP-28
3000
36V, 3.8A double H bridge for two brush or single stepper motor drivers
Maxim
TSSOP-28
3000
36V, 3.8A stepper motor driver with integrated current detection and 128 microstep divider
Maxim
TSSOP-28
3000
36V, 3.8A four-way H half-bridge driver with integrated current detection
Maxim
TSSOP-38
3000
65V, 3.8A four-way H half-bridge driver with integrated current detection
A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.
A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.
A: at present, our self-employed brands TI,ST,ADI,NXP,LATTICE,CYPRESS,INFINEON,XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.
A: You can inquire through the website, or by phone and email.
A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.
A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.
Allegro MicroSystems, LLC. is an industry leader in the development, manufacture and sale of high performance power supply and Hall-effect sensor integrated circuits. Allegros innovative solutions serve a variety of high-growth applications in the aut…
ACS711KEXLT-30AU
The ACS711KEXLT-30AU provides an economical and accurate solution for AC or DC current sensing in <100 V audio, communication systems and large home appliance applications.ACS733KLATR-20AB
The ACS733KLATR-20AB is a new generation of high-bandwidth current sensor ICs from Allegro.A5932KLPTR
The A5932KLPTR three-phase motor controller uses a sine wave drive to minimise noise and vibration in high-power fans.A3910EEETR
The A3910EEETR is a dual half-bridge motor driver designed for low-cost, low-voltage battery-powered applications.A19420LUBBTN
The A19420LUBBTN is an optimized Hall-effect integrated circuit (IC) that measures the speed of rotating targets.ARS19510LUBLTN-RSWPHKJ
The ARS19510LUBLTN-RSWPHKJ integrates advanced Hall-effect circuit ics and EMC protection components in a single-pack, multiform package. Optimized, user-friendly solutions provide directional detection and true zero-speed digital gear sensing for cha…Contact Number:86-755-83294757
Enterprise QQ:1668527835/ 2850151598/ 2850151584/ 2850151585
Business Hours:9:00-18:00
E-mail:sales@hkmjd.com
Company Address:Room1239, Guoli building, Zhenzhong Road, Futian District, Shenzhen, Guangdong
CopyRight ©2022 Copyright belongs to Mingjiada Yue ICP Bei No. 05062024-12
Official QR Code
Links: