Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

The SPC58 N line performance microcontroller features Power Architecture® technology and is designed for mission critical automotive applications where compliance with the most stringent safety standards and real-time performance are critical. The SPC58 N line performance MCUs are embedded with three cores (each at 200MHz) and a 200MHz General Timer IP Module (GTM), specifically designed for applications requiring high performance, faster signal processing and minimal to zero CPU load.

Designed to meet the highest ASIL-D safety levels, the SPC58 N-Line MCU family is ideally suited for advanced powertrain applications, hybrid electric vehicle (HEV) and electric vehicle (EV) motor drives, electric power steering, active suspension applications, anti-lock braking and advanced driver assistance systems (ADAS).

The SPC58 N line MCUs offer outstanding performance with up to three cores and up to 6MB of embedded flash memory and independent SAR and sigma-delta analog-to-digital converters to ensure high speed, high accuracy and high resolution sensing. These devices support high operating temperatures and ensure enhanced connectivity through a wide range of communication interfaces, including Ethernet, Flexray, CAN FD, LIN and SENT.

Features

AEC-Q100 compliant

32-bit Power Architecture VLE-compatible CPU core

Five enhanced main e200z4256n3 cores, dual instruction execution, two paired in lock-step mode

Floating-point, end-to-end error correction

6576KB (6288KB code flash + 288KB data flash) on-chip flash

Supports reads during programming and erase operations and multiple blocks allowing EEPROM emulation

Supports reads between two code memories

128KB on-chip general purpose SRAM (plus 384KB included in the CPU)

96-channel direct memory access controller (eDMA)

Comprehensive new generation ASIL-D security concept.

ASIL-D in ISO 26262

FCCU for collecting and responding to fault notifications

Memory Error Management Unit (MEMU) for collecting and reporting error events in memory

Cyclic Redundancy Check (CRC) unit

Dual-channel FlexRay controller

Hardware Safety Module (HSM)

GTM344 - Universal Timer Module

Intelligent compound timer module

144 channels (48 inputs and 96 outputs)

5 programmable fine-grain multi-threaded cores

61KB dedicated RAM

24-bit wide channel

Enhanced analogue-to-digital converter system with the following devices.

1 monitor 12-bit SAR analogue converter

2 independent 10-bit SAR analogue converters

4 independent fast 12-bit SAR analogue converters

6 independent 16-bit sigma-Δ type analogue converters with programmable extraction filters

SAR ADC queue digital interface for individual channel ordering and command sequencing

Communication interfaces

7 LINFlexD modules

8 deserialised serial line peripheral interface (DSPI) modules

7 Modular Controller Local Area Network (MCAN) modules and 1 Time-Triggered Controller Local Area Network (M-TTCAN), all supporting flexible data rates (ISO CAN-FD)

One Ethernet controller 10/100Mbps, IEEE 3-2008 compliant

Flexible power supply options

External voltage regulator (1.2V core, 3.3V to 5V IO)

Single internal SMPS regulator

Nexus Development Interface (NDI), IEEEISTO 5001-2003 compliant, partial support for 2010 standard

Boot Assisted Flash (BAF) supports factory programming via asynchronous CAN or LIN/UART and with serial boot loading

Junction temperature range: -40°C to +165°C

Package options: eLQFP-176 (24.0mm x 24.0mm x 1.4mm)

Applications

Advanced powertrain applications

Hybrid Electric Vehicle (HEV) and Electric Vehicle (EV) motor drives

Electric steering systems

Active suspension applications

Anti-lock brakes

Advanced Driver Assistance Systems (ADAS)

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.