Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

10128405-11JLF -- ExaMAX® 56Gb/s High Speed Backplane Connector 92Ohm, 2-Pair, 10 column, 80 position, Right Angle Header, Right Guide Pin.

Overview

The Amphenol ExaMAX backplane connector system is designed for higher bandwidth applications from 25 Gb/s to 56 Gb/s. The optimized connector design provides superior signal integrity performance for low crosstalk noise and low plug loss. Each signal wafer features an innovative one-piece embossed-ground construction that increases crosstalk performance to 56 Gb/s.

Features

The non-polar mating interface protects the mating beam

Durable and reliable plug interface design eliminates pin breakage

Modular, 2 mm and 3 mm hard metric connector block design

2 mm spacing enables high density and 3 mm spacing enables low cost PCB four-way wiring

Zero offset

Optimize PCB routing

Attach signal pins to each column

Integrate high and low speed signals in the same connector

0.36mm PCB signal hole and 0.5mm PCB ground hole

Optimize electrical performance and aspect ratio

12 to 96 differential pairs of node connectors

The wide range of products is suitable for a variety of packaging options

92 ohm /85 ohm impedance design

Supports data rates of 25 Gb/s and can be scaled up to 56 Gb/s migration paths

Conforms to industry specifications such as Optical Interconnection Forum (OIF), PCI Express® (PCIe), SATA, Fibre Channel (FC), InfiniBand, Ethernet, SAS, IBTA, and IEEE

Supports 85 ohm and 100 ohm applications

Performance can be extended from 25 Gb/s to 56 Gb/s

Backward-configured and packaged with ExaMAX VS compatibility

Unique beam-to-beam interface and offset balanced lead frame

Lower crosstalk, minimal insertion loss and 65% less insertion and withdrawal force compared to the cutter beam design

Integrated oriented design

Improve plug performance with minimal board space

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.