Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

The F6122SAVGI8 is a 16-ch dual-beam receive active beamforming RFIC designed for application in Ka-Band SATCOM planar phased array antennas. The IC has eight RF input ports, two RF output ports and 16 (8 per beam) phase/amplitude control channels. The eight input ports of the IC may be driven by eight single-polarized elements or four dual-polarized elements of an electronically scanned array (ESA). Each channel has 6-bits of digital phase and gain control resolution spanning 360° and 26dB of dynamic range, enabling precise beam pattern and polarization control.

Features

17.7GHz – 21.2GHz operation

Supports 4 dual-pol or 8 single-pol elements

Two simultaneous and independent beam outputs

360deg phase control with 6-bit resolution

26dB gain control with 0.45dB step size

2.3V nominal single supply input

Standard 1.8V digital logic

IDAC for external LNA biasing

Temperature compensation

Temperature sensor w/ digital readout

Advanced digital modes with fast beam steering

On-chip beam-state memory

3.8 x 4.6 x 0.9 mm, 63-pin FC-BGA

Applications

Phased Array Antennas

K/Ka-Band SATCOM Terminals

Aerospace, Maritime and SOTM

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.