Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

The S25FL064LABNFB010 is a 3.0 V, single-supply flash memory device in a 65 nm floating gate process.

Features

Multi-I/O serial peripheral interface (SPI)

Clock polarity and phase modes 0 and 3

Double data rate (DDR) option

Quad Peripheral Interface (QPI) option

Extended addressing: 24-bit or 32-bit address options

Serial command subset and footprint compatible with the S25FL-A, S25FL1-K, S25FL-P, S25FL-S and S25FS-S SPI families

Multi-I/O command subset and footprint compatible with the S25FL-P, S25FL-S, and S25FS-S SPI families

Read

Commands: Normal, Fast, Dual I/O, Quad I/O, Dual O, Quad O, DDR Quad I/O

Modes: Burst Loopback, Continuous (XIP), QPI

Serial Flash Discoverable Parameters (SFDP) for configuration information

Programming architecture

256-byte page programming buffer 3.0V FL-L flash memory

Program pause and resume

Erase Architecture

Unified 4KB sector erase

Unified 32KB half-block erase

Unified 64KB block erase

Chip Erase

Erase pause and resume

100,000 programme erase cycles

20 years of data retention

Typical Technology

65nm floating gate technology

Safety Features

Status and configuration register protection

Four 256-byte security zones, all external to the main flash array

Traditional block protection: block ranges

Individual and regional protection

Individual block locking: volatile individual sectors/blocks

Pointer regions: non-volatile sector/block ranges

Power lockout, password or permanent protection for security areas 2 and 3 and pointer area

Single supply voltage with CMOS I/O

2.7V to 3.6V

Temperature range

Automotive AEC-Q100 compliant Class 2 (-40°C to +105°C)

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.