Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

AVR32DD28T-I/SS microcontrollers of the AVR® DD Family of microcontrollers are using the AVR® CPU with hardware multiplier running at clock speeds up to 24 MHz, with up to 32 KB of Flash,up to 4 KB of SRAM, and 256 bytes of EEPROM. The microcontrollers are available in 28- or 32-pin packages. The AVR DD Family uses the latest technologies from Microchip Technology, with a flexible and low-power architecture, including the Event System, intelligent analog features, and advanced digital peripherals.

Features

Running at up to 24 MHz

Single-cycle I/O access

Two-level interrupt controller

Two-cycle hardware multiplier

Supply voltage range: 1.8V to 5.5V

Up to 32 KB in-system self-programmable Flash memory

256B EEPROM

Up to 4 KB SRAM

32B of user row in nonvolatile memory that can keep data during chip erase and can be programmed while the device is locked

Power-on Reset (POR) circuit

Brown-out Detector (BOD)

Clock options

High-precision internal high-frequency oscillator with selectable frequency up to 24 MHz

Auto-tuning for improved internal oscillator accuracy

Internal PLL up to 48 MHz for high-frequency operation of Timer/Counter type D

32.768 kHz ultra-low power internal oscillator (OSC32K)

32.768 kHz external crystal oscillator (XOSC32K)

External clock input

External high-frequency crystal oscillator (XOSCHF) with Clock Failure Detection

Single-pin Unified Program and Debug Interface (UPDI)

Three sleep modes

Idle with all peripherals running for immediate wake-up

Standby with a configurable operation of selected peripherals

Power-Down with full data retention

Automated Cyclic Redundancy Check (CRC) Flash memory scan

Watchdog Timer (WDT) with Window mode, with a separate on-chip oscillator

External interrupt on all general purpose pins

Fractional baud rate generator, auto-baud, and start-of-frame detection

One SPI with host/client operation modes

One Two-Wire Interface (TWI) with dual address match

Simultaneous host/client operation (Dual mode)

Philips I2C compatible

Standard mode (Sm, 100 kHz)

Multi-Voltage I/O (MVIO) on I/O port C

Selectable input voltage threshold

Up to 27/26 programmable I/O pins

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.