Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

ADPD6000BCBZR7 is a highly integrated analog front end designed for measuring various vital signals. The optical channel is designed as an optical transceiver, stimulating up to four light emitting diodes and measuring the return signal on up to four separate current inputs.

Features

4 input channels with multiple operation modes for various sensor measurements

Dual channel processing with simultaneous sampling

12 programmable time slots for synchronized sensor measurements

Flexible input multiplexing to support single-ended sensor measurements

4 LED drivers, 2 of which can be driven simultaneously

Flexible sampling rate from 0.004 Hz to 9 kHz using internal oscillators

SNR of transmit and receive signal chain: 117 dB (with off-chip filtering)

AC ambient light rejection: 78 dB up to 100 Hz

400 mA total LED peak drive current

Individual ambient light rejection DAC at TIA input with 9-bit control up to 300 μA

Individual LED dc cancellation DAC at TIA input with 7-bit control up to 190 μA

0.75 μV rms RTI noise at diagnostic filter bandwidth (150 Hz)

High input impedance: 3 GΩ

Accepts up to 1.2 V of dc differential input range

Common-mode rejection ratio: 116 dB

Two-electrode and three-electrode configurations

AC lead off detection and dc lead off detection

Low power, high accuracy excitation path

Configurable output frequency up to 250 kHz

Sine wave excitation with a 12-bit DAC

High accuracy with large imbalance contact impedance

Configurable receive filters with low noise design

Complex impedance measurement engine

Supports both external calibration and internal calibration

SPI communications supported

640-byte FIFO

Applications

Wearable health and fitness monitors: heart rate, heart rate variability, SpO2, body impedance analysis, hydration, cuffless noninvasive blood pressure

Home patient monitoring

Industrial monitoring: particle and aerosol, gas, and conductivity detection

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.