Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

The DPS310XTSA1 is a miniature digital barometric pressure sensor featuring high accuracy and low current consumption for simultaneous measurement of pressure and temperature. The pressure sensor element is based on the capacitive sensing principle which ensures high accuracy during temperature changes. The small package makes the DPS310XTSA1 ideal for mobile applications and wearable devices. An internal signal processor converts the output of the pressure and temperature sensor elements into a 24-bit result. Each unit is individually calibrated and the calibration coefficients calculated during calibration are stored in the calibration register.

Product Properties

Pressure Type: Absolute

Operating Pressure: 4.35PSI ~ 17.4PSI (30kPa ~ 120kPa)

Output Type: I²C, SPI

Output: 24 b

Accuracy: ±0.015PSI (±0.1kPa)

Voltage - Supply: 1.7V ~ 3.6V

Characteristics: Temperature compensated

Termination Style: SMD (SMT) Tabs

Maximum Pressure: 145PSI (999.74kPa)

Operating Temperature: -40°C ~ 85°C

Mounting Type: Surface Mount

Package/Housing: 8-VFLGA

Supplier Device Package: PG-VLGA-8-1

Applications

● Indoor navigation (e.g. floor detection in shopping malls and car parks)

● Health and exercise (precise elevation gain and vertical velocity)

● Outdoor navigation (GPS start-up time and accuracy improvements, e.g., trajectory projection in tunnels)

● Weather stations ("micro-weather" and local weather forecasts)

● Hard disc drivers (leakage rate detection in hard disc drives)

● Drones (flight stability and altitude control)

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.