Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

Shenzhen Mingjiada Electronics Co., Ltd. introduces Amphenol ExaMAX® 56Gb/s High-Speed Backplane Connectors - 10128415-101LF 92 Ohm, 3 Pair, 8 Row, 88 Position, Right Angle Header, No Lead Pin.

Introduction: 10128415-101LF

The ExaMAX® backplane connector system meets industry specifications for higher bandwidth applications from 25Gb/s to 56Gb/s. The optimised connector design delivers superior signal integrity performance, achieving low crosstalk noise and low insertion loss while minimising channel performance variation per differential pair. Each signal chip features an innovative monolithic relief ground structure for improved crosstalk performance (56Gb/s). The simple, practical design helps to achieve a very cost-effective solution.

1、Innovative on-beam contact interface minimises residual stubs to improve signal integrity performance while providing extremely low mating forces 

2、ExaMAX® optimises design flexibility by integrating high-speed differential signals, low-speed signals and power supplies in a single connector. 

3. The ExaMAX® product family is available in industry-standard packaging options including traditional backplanes, common panels, quadrature midplane and quadrature direct mating, mezzanine and wire-to-board.

Features: 10128415-101LF

Data rates scalable from 25Gb/s to 56Gb/s to support system upgrades without costly redesigns

92Ω nominal impedance 

Scalable performance

Unique beam-to-beam interface and tilt-equalised leadframe

Hermaphroditic mating interface protects mating beams

Modular, hard metric connector block design

Zero skew

Additional signal pins per row

High-speed signal PCB hole: 0.36 mm (finished hole) 

Ground pin PCB hole: 0.5 mm (finished hole)

12 to 96 Differential Pair Node Connectors

Integrated Rail Design

Performance

Contact resistance: 20mV max, 100mA current

Insulation Resistance 500VDC

Insulation Withstanding Voltage: 500VDC

§Current rating (at 30°C above ambient)

Signal contact: 0.5A/contact (both signal and ground contacts can carry current)

Ambient

Operating temperature range: -55°C to +85°C

Applications

Hubs

Optical transmission

Routers

Switches

Wireless Infrastructure

External Storage Systems

Servers

Supercomputers

Simulation equipment

Industrial and Instrumentation

Test equipment