sales@hkmjd.com
Service Telephone:86-755-83294757
ADI LT1796IS8 125kbps Overvoltage Fault Protected CAN TransceiverShenzhen Mingjiada Electronics Co., Ltd., a well-known domestic supplier of electronic components, offers the ADI LT1796IS8 high-reliability CAN bus transceiver chip in stock. This chip …
ADI LT1796IS8 125kbps Overvoltage Fault Protected CAN Transceiver
Shenzhen Mingjiada Electronics Co., Ltd., a well-known domestic supplier of electronic components, offers the ADI LT1796IS8 high-reliability CAN bus transceiver chip in stock. This chip is specifically designed for industrial and automotive electronic systems, featuring ±60V overvoltage protection, a data transfer rate of 125 kbps, and excellent EMI suppression capabilities, making it an ideal choice for building a stable and reliable CAN communication network.
LT1796IS8 Product Overview:
LT1796IS8 CAN transceiver provides built-in fault tolerance to survive in industrial and automotive environments. Discrete protection devices are not needed. Bus interface pins can withstand voltage faults up to ±60V with respect to ground with no damage to the device. Faults may occur while the transceiver is active, shut down or powered off. On-chip ESD protection withstands up to ±15kV air discharges and ±8kV contact mode discharges tested per IEC-1000-4-2. Loss of power or ground connections does not damage the IC.
LT1796IS8 operates with data rates up to 125kbaud. A slew control pin allows control of transmitted data pulse edges to control EMI and reflection problems on imperfectly terminated lines. High output current drive allows the use of inexpensive PVC cable with impedance as low as 72Ω. The 100kΩ input impedance allows up to 256 transceivers per data network.
Key features of the LT1796IS8 include:
Exceptional overvoltage protection capability: The bus interface pins can withstand voltage faults up to ±60V (relative to ground potential) without damaging the device, and this protection is effective whether the transceiver is in operation, shutdown, or power-off mode.
Robust ESD protection: The on-chip ESD protection circuit can withstand air discharge tests of up to ±15kV and contact mode discharge tests of up to ±8kV, fully meeting the IEC-1000-4-2 Level 4 specification requirements.
High reliability design: Loss of power or ground connections will not damage the IC, and all output pins provide short-circuit protection and thermal shutdown protection functions.
Flexible node expansion: A 100kΩ input impedance enables each data network to support up to 256 transceiver nodes, meeting the networking requirements of complex systems.
Optimised EMI performance: The data pulse edge of the transmitted data can be adjusted via the conversion rate control pin, effectively suppressing EMI and reflection issues on improperly terminated lines.
LT1796IS8 Technical Specifications:
Type: CAN controller
Mounting method: SMD/SMT
Package/housing: SOIC-8
Data rate: 125 kb/s
Number of drivers: 1 driver
Number of receivers: 1 receiver
Supply Voltage - Minimum: 4.75 V
Supply Voltage - Maximum: 5.25 V
Minimum Operating Temperature: -40 °C
Maximum Operating Temperature: +85 °C
Operating Supply Current: 7 mA
Electrostatic Discharge Protection: 15 kV
LT1796IS8 Application Areas:
Automotive Electronic Systems: Including engine control units (ECUs), body control systems, in-vehicle infotainment systems, etc., meeting the requirements of automotive electronics for high reliability and adaptability to harsh environments.
Industrial Automation Control: Suitable for industrial equipment such as PLCs, industrial robots, and sensor networks, ensuring stable communication in environments with strong electromagnetic interference.
HVAC control systems: Used in HVAC systems within building automation to achieve reliable data exchange between devices.
Other applications: Also applicable in medical devices, aerospace electronics, and other scenarios with high requirements for communication reliability.
Time:2025-08-04
Time:2025-08-04
Time:2025-08-04
Time:2025-08-04
Contact Number:86-755-83294757
Enterprise QQ:1668527835/ 2850151598/ 2850151584/ 2850151585
Business Hours:9:00-18:00
E-mail:sales@hkmjd.com
Company Address:Room1239, Guoli building, Zhenzhong Road, Futian District, Shenzhen, Guangdong
CopyRight ©2022 Copyright belongs to Mingjiada Yue ICP Bei No. 05062024-12
Official QR Code
Links: