sales@hkmjd.com
Service Telephone:86-755-83294757
Microchip Ethernet Switch KSZ8864CNXIA Integrated 4-Port 10/100 Managed Switch
Shenzhen Mingjiada Electronics Co., Ltd. sells Microchip Ethernet Switch KSZ8864CNXIA Integrated 4-Port 10/100 Managed Switch with Two MAC MII or RMII Interfaces in StockOverview:The KSZ8864 is a highly integrated Layer 2 managed 4-port switch with an…
Shenzhen Mingjiada Electronics Co., Ltd. sells Microchip Ethernet Switch KSZ8864CNXIA Integrated 4-Port 10/100 Managed Switch with Two MAC MII or RMII Interfaces in Stock
Overview:
The KSZ8864 is a highly integrated Layer 2 managed 4-port switch with an optimised design, rich features and small package size.The KSZ8864 is Automotive Approved (AEC-Q100).
The KSZ8864 is designed for cost-sensitive 10/100Mbps 4-port switch systems. On-chip termination, low power consumption, and a small package save system cost, and the KSZ8864 features a shared memory-based switching fabric for a completely non-blocking configuration.
The KSZ8864 also offers an extensive feature set including: power management, programmable rate limiting and priority ratios, tag/port based VLANs, packet filtering, Quality of Service (QoS), four queue priorities, management interface, and MIB counters. Ports 3 and 4 support MII or RMII interfaces.The KSZ8864 provides multiple CPU control/data interfaces to effectively address a variety of Fast Ethernet applications.
The KSZ8864 consists of four MACs and two PHYs. two PHYs support 10/100Base-T/TX. all registers of the MAC and PHY units can be managed through the SPI or SMI control interfaces. the MIIM registers of the PHYs can be accessed through the MDC/MDIO interface. In unmanaged mode, the EEPROM can set all control registers through the I2C control interface.
Features:
Fully managed 4-port 10/100Mbps switch with dual MII/RMII interfaces
IEEE802.1q VLANs
QoS packet prioritisation
IEEE802.1d Rapid Spanning Tree Protocol
Programmable rate limiting on ingress and egress by port and priority level
Source MAC address filtering with ring support
MIB counters provide fully compatible statistics with up to 34 MIB counters collected per port
Ultra-low power consumption with integrated line termination
Single 3.3V supply with built-in 1.2V LDO controller
Flexible VDDIO support for 3.3V, 2.5V and 1.8V
AEC-Q100 certified
Industrial temperature range: -40°C to +85°C
8mm x 8mm QFN-64 package
Parameters:
Model No.: KSZ8864CNXIA
Managed: Yes
Ethernet Ports: 4
Ethernet Bandwidth: 10/100Mbps
Interface: MII (2)/RMII (2)
Copper Support: 10/100 (2)
Fibre Support: No
IEEE1588: None
Minimum Temperature Range: -40
Maximum Temperature Range: 85
Operating Voltage: 3.3
Supply Voltage (V): 3.3
Vdd Input/Output (V): 1.8/2.5/3.3
Internal LDO: No
LinkMD Cable Diagnostics: Yes
Intelligent Power Conditioning: Yes
IPV6: Yes
Flow Control: Yes
Rate Limiting: Yes
Rapid Generation: Yes
Static MAC Address: Yes
Wake-on-LAN: No
Company Home: http://www.hkmjd.com/
Time:2025-06-24
Time:2025-06-24
Time:2025-06-24
Time:2025-06-24
Contact Number:86-755-83294757
Enterprise QQ:1668527835/ 2850151598/ 2850151584/ 2850151585
Business Hours:9:00-18:00
E-mail:sales@hkmjd.com
Company Address:Room1239, Guoli building, Zhenzhong Road, Futian District, Shenzhen, Guangdong
CopyRight ©2022 Copyright belongs to Mingjiada Yue ICP Bei No. 05062024-12
Official QR Code
Links: