Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

DAC60516RUYR (DAC) : 16-channel, 12-bit voltage output, with an internal 2.5V reference voltage and 50mA drive capability

This device has the following characteristics:

Performance:

INL: ±1LSB (maximum value) at 12-bit resolution

TUE: ±0.15% of the maximum value of FSR

Integrate a 2.5V precise internal reference

Initial accuracy: ±2.5mV (maximum value)

Temperature drift: 15ppm/°C (typical value)

High driving capacity: 50mA, with a swing of 0.5V relative to the power rail

Flexible configuration options

User-selectable gains: 2 ×, 1 ×

Reset to the zero scale

Reset output function

Wide operating voltage range:

Power supply: 2.7V to 5.5V

Temperature range: -40°C to +125°C

SPI and I2C interfaces: Operating voltage ranges from 1.7V to 5.5V

SPI: 4-wire interface

I2C: Four destination addresses

Small package: 4mm × 4mm, 28-pin WQFN

Product Description

The 12-bit DAC60516RUYR is a low-power 16-channel buffered voltage output digital-to-analog converter (DAC). This device includes an internal reference of 2.5V and 15ppm/°C, so an external precise reference is not required in most applications. Through the user-selectable gain configuration, a full-scale output voltage of 2.5V or 5V can be provided. The DAC60516RUYR is powered by a single power supply.

The communication of DAC60516RUYR is carried out through a serial interface that supports SPI and I2C, with an operating clock rate of up to 50MHz (during the process of SPI writing to the device). The VIO pin enables the serial interface to operate within a voltage range of 1.7V to 5.5V. The flexible interface of DAC60516RUYR enables it to be compatible with a wide range of microprocessors and microcontrollers commonly used in the industry.

Application scenarios

The DAC60516RUYR is suitable for optical modules, data center interconnect, analog output modules and other ‌ scenarios.

The DAC60516RUYR has the following main specifications:

Digit number: 12

Digital-to-analog converter number: 3

Establishment time: 6µs (typical value)

Output type: Voltage-Buffered

Differential output: None

Data interfaces: 2-Wire Serial, 4-Wire Serial, I2C, SPI

Reference types: External, Internal

Voltage - Power supply, simulation: 2.7V to 5.5V

Voltage - Power supply, digital: 2.7V to 5.5V

INL/DNL (LSB) : ±1 (maximum), ±1 (maximum)

Architecture: R-2R

Operating temperature: -40°C to 125°C

Device packaging: 28-WQFN (4x4)

If you need to obtain [DAC60516RUYR] samples or purchase consultation, you can contact Mingjiada Electronics online by visiting the official website (www.hkmjd.com), and we will wholeheartedly provide you with high-quality products and services!