Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

Shenzhen Mingjiada Electronics Co., Ltd Original Genuine [Sell NXP] Low Cost Microcontroller (MCU) LPC804M101JHI33 Based on the Arm® Cortex®M0+ core, it operates at up to 15 MHz.The LPC80x MCU series supports up to 32 KB of Flash memory and 4 KB of SRAM.

Description of the LPC804M101JHU

The LPC804M101JHI33's peripherals include a CRC engine, two I2C bus interfaces, up to two USARTs, an SPI interface, capacitive touch interface (Cap Touch), a multirate timer, wake-up timer, a general-purpose 32-bit counter/timer, a 12-bit ADC, a 10-bit DAC, an analogue comparator, a function matrix via switches, and a switch matrix for function comparison. A 12-bit ADC, a 10-bit DAC, an analogue comparator, functionally configurable I/O ports via a switch matrix, an input pattern matching engine, programmable logic unit (PLU), and up to 30 general-purpose I/O pins.

Features

SYSTEMS

- Arm Cortex-M0+ processor (version r0p1) with up to 15 MHz runtime, integrated single-cycle multiplier and fast single-cycle I/O ports

- Arm Cortex-M0+ with built-in nestable vector interrupt controller (NVIC)

- System beat timer

- AHB Multi-Layer Matrix

- Serial Wire Debug (SWD) with four breakpoints and two watchpoints JTAG boundary-scan (BSDL) support

Memory

- Up to 32 KB of on-chip Flash programming memory

- Code Read Protection (CRP)

- Up to 4 KB SRAM

- Dual I/O power supplies (LPC802M011JDH20, LPC804M111JDH24):

- Independent power supplies on each side of the package support level-shifted signals from one off-chip power domain to the other, and/or direct connection of off-chip peripherals with different power levels

ROM API support

- Bootloader

- Supports Flash In-Application Programming (IAP)

- Supports In-System Programming (ISP) via USART

- On-chip ROM API for integer division

- Free-Run Oscillator (FRO) API

Digital Peripherals

- High-speed GPIO interface to Arm Cortex-M0+ I/O bus, integrating up to 30 general purpose I/O (GPIO) pins with configurable pull-up/pull-down resistors, programmable open-drain mode, and input inverters GPIO directional control supports setting/clearing/toggling individual bits independently

- High-current source output driver (20 mA) on three pins

- GPIO interrupt generation with Boolean mode matching on 8 GPIO inputs. (LPC804)

- Switching matrix for flexible configuration of each I/O pin's functionality

- CRC engine

- Capacitive touch interface (LPC804)

- Programmable Logic Unit (PLU) Used to create small combinational and/or sequential logic networks, including simple state machines. (LPC804)

Timer

- A 32-bit general purpose counter/timer with 4 match inputs and 3 capture inputs supporting PWM mode and external counting.

- Multi-Rate Timer (MRT) capable of generating repetitive interrupts at up to four programmable fixed rates

- Wake-up timer (WKT) with free-running oscillator (FRO), low-power, low-frequency internal oscillator, or external clock inputs as clock inputs

- Windowed Watchdog Timer (WWDT)

Analogue Peripherals

- A 12-bit ADC with up to 12 input channels and multiple internal and external flip-flop inputs and sample rates up to 480 KS/s. The ADC supports two independent conversion sequences.

- Comparator with five input pins and external or internal reference voltage.

- One 10-bit DAC (LPC804)

Serial Peripherals

- Two USART interfaces with pin assignments via a switch matrix and a fractional baud rate generator.

- 1 SPI controller with pin assignment via switch matrix

- Up to two I2C bus interfaces supporting data rates up to 400 kbit/s (standard digital pins)

Clock generation

- Free-Run Oscillator (FRO) This oscillator provides selectable 9 MHz, 12 MH, and 15 MHz outputs that can be used as the system clock FRO is tuned to ±1 % accuracy over the full voltage and temperature range of 0 °C to 70 °C

- 1 MH low-power oscillator that can be used as a clock source

- Clock output function, frequency divider to reflect all internal clock sources

Power control

- Low-power modes: sleep mode, deep sleep mode, power-down mode, and deep power-down mode

- Wake from deep sleep and power-down modes via activity on USART, SPI and I2C peripherals

- Wake from deep power-down mode via multiple pins

- Timer-controlled self wake-up from sleep, deep sleep and deep power-down modes

- Power On Reset (POR)

- Power-On Reset (POR) Power-Off Detection (BOD)

Other Features

- Unique serial number for chip identification

- Single or dual power supply (1.71 V to 3.6 V)

- Operating temperature range: -40 °C to +105 °C

Applications

- Wearable products

- Hearing aids

- Smart watches

- Industrial controls

- Surround Vision

- Vital Signs Monitors

- Air Conditioning (AC)

- Motion Control & Robotics

- Smart Cities

- POS Terminal

- Smart Home

- Home Control Panels

- Home Energy Displays

- Toys and board games

- Communications Infrastructure

- Broadband modems and home gateways

For more information, please call Mr Chen

Tel: +86 13410018555

Email: sales@hkmjd.com

Home URL: www.hkmjd.com