Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

TI M0G3107QPMRQ1 Automotive 80MHz Arm Cortex-M0+ Microcontrollers MCU

Product Description of M0G3107QPMRQ1

M0G3107QPMRQ1 microcontrollers (MCUs) are part of the MSP highly-integrated, ultra-low-power 32-bit MCU family based on the enhanced Arm Cortex-M0+ 32-bit core platform operating at up to 80MHz frequency. These cost-optimized MCUs offer high-performance analog peripheral integration, support extended temperature ranges from -40°C to 125°C, and operate with supply voltages ranging from 1.62V to 3.6V.

M0G3107QPMRQ1 devices provide up to 128KB embedded flash program memory with built-in error correction code (ECC) and up to 32KB SRAM with hardware parity option. The devices also incorporate a memory protection unit, 7-channel DMA, and a variety of high-performance analog peripherals such as two 12-bit 4Msps ADCs, configurable internal shared voltage reference, and one general-purpose amplifier. These devices also offer intelligent digital peripherals such as two 16-bit advanced control timers, five general purpose timers (with one 16-bit general-purpose timer for QEI interface, two 16-bit general-purpose timers for STANDBY mode, and one 32-bit general-purpose timer), two windowed-watchdog timers, and one RTC with alarm and calendar mode. These devices provide data integrity and encryption peripherals (CRC, TRNG, AES) and enhanced communication interfaces (four UART, two I2C, two SPI, CAN 2.0/FD).

Feature of M0G3107QPMRQ1

Core

Arm 32-bit Cortex-M0+ CPU with memory protection unit, frequency up to 80MHz

Functional Safety Quality-Managed

Functional Safety Manual and FMEDA available to aid in functional safety system design

Operating characteristics

Extended temperature: –40°C up to 125°C

Wide supply voltage range: 1.62V to 3.6V

Memories

Up to 128KB of flash memory with built-in error correction code (ECC)

Up to 32KB of SRAM with hardware parity

High-performance analog peripherals

Two simultaneous sampling 12-bit 4Msps analog-to-digital converters (ADCs) with up to 17 external channels

14-bit effective resolution at 250ksps with hardware averaging

One general-purpose amplifier (GPAMP)

Configurable 1.4V or 2.5V internal shared voltage reference (VREF)

Integrated temperature sensor

Integrated supply monitor

Intelligent digital peripherals

7-channel DMA controller

Two 16-bit advanced control timers support dead band insertion and fault handling

Seven timers supporting up to 22 PWM channels

One 16-bit general purpose timer

One 16-bit general purpose timer supports QEI

Two 16-bit general-purpose timers support low-power operation in STANDBY mode

One 32-bit general-purpose timer

Two 16-bit advanced timers with deadband

Two window-watchdog timers

RTC with alarm and calendar mode

Enhanced communication interfaces

Four UART interfaces; one supports LIN, IrDA, DALI, Smart Card, Manchester, and three support low-power operation in STANDBY mode

Two I2C interfaces supporting up to FM+ (1Mbit/s), SMBus, PMBus, and wakeup from STOP mode

Two SPIs, one SPI supports up to 32Mbits/s

One Controller Area Network (CAN) interface supports CAN 2.0 A or B and CAN-FD

Clock system

Internal 4MHz to 32MHz oscillator with up to ±1.2% accuracy (SYSOSC)

Phase-locked loop (PLL) up to 80MHz

Internal 32kHz oscillator (LFOSC) with ±3% accuracy

External 4MHz to 48MHz crystal oscillator (HFXT)

External 32kHz crystal oscillator(LFXT)

External clock input

Data integrity and encryption

Cyclic redundancy checker (CRC-16, CRC-32)

True random number generator (TRNG)

AES encryption with 128- or 256-bit key

Flexible I/O features

Up to 60 GPIOs

Two 5V-tolerant IOs

Two high-drive IOs with 20mA drive strength

Development support

2-pin serial wire debug (SWD)

Applications of M0G3107QPMRQ1

Automotive body electronics and Lighting

Automotive Gateway

Steering Wheel Systems

Automotive Motor Control

DC to AC Inverters

Automotive Interior Lighting

Door handle modules

Kick to open modules

Vehicle Occupancy Detection

Seat Comfort Module