Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

The ADSP-BF608KBCZ-5‌ is a high-performance Blackfin processor from ADI with outstanding processing power, rich peripheral interfaces, and efficient power consumption ratio. This processor uses advanced power management technology to adjust the frequency and voltage of the processor according to actual needs for low power operation, and is particularly suitable for battery-powered applications such as portable devices and wearable devices ‌.

The ADSP-BF608KBCZ-5 processor has the following main features:

It features two Blackfin cores with a maximum operating frequency of 500 MHz/1000 MMAC (totaling 2000 MMAC), making it suitable for demanding signal processing applications.

The 552 KB on-chip SRAM consists of 148kB L1 SRAM per core that supports parity check and a shared 256kB L2 SRAM that supports ECC.

Pipeline Vision Processor (PVP), supporting VGA.

Pixel synthesizer.

Fully integrated DMA controller, supporting DMA transfer with all on-chip and off-chip memories and peripherals.

3x Enhanced Serial Peripheral Interface (ePPI), supporting up to 24-bit data width and ITU-R BT.656 mode, can be directly connected to TFT LCD panels, serial converters, video encoders and decoders, image sensors, and other general-purpose peripherals.

USB 2.0 HS OTG.

Mobile Memory Interface (RSI)

Two 10/100 megabit Ethernet Macs, supporting IEEE 1588.

Controller Area Network (CAN) interface.

It has 4 link ports and supports 8-bit wide DMA enabling data transmission.

2 watchdog timers and 8 timers/counters, supporting PWM.

CRC engine.

Two SPI-compatible ports, supporting both master and slave modes.

Two UArts and two dual-wire interfaces.

Two 16-bit pulse width modulation (PWM) channels.

19×19 mm CSP BGA package.

Provide temperature ranges for commercial, industrial and automotive applications.

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.