Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

DP83867CSRGZR (Ethernet PHY)——Low Power, Rugged Gigabit Ethernet PHY Transceiver with SGMII Interface Support

Model Number: DP83867CSRGZR

Package: VQFN-48

Type: Gigabit Ethernet PHY Transceiver

The DP83867CSRGZR is a robust, low-power, full-featured physical layer transceiver that integrates a PMD sublayer to support the 10BASE-Te, 100BASE-TX, and 1000BASE-T Ethernet protocols.The DP83867 is optimised to provide ESD protection exceeding the 8kV IEC 61000-4-2 standard (direct contact).

The DP83867CSRGZR is designed to easily implement 10/100/1000Mbps Ethernet LANs. The DP83867 connects directly to twisted pair media via an external transformer. The device connects directly to the MAC layer via the RGMII or embedded clock SGMII.

The DP83867CSRGZR provides precise clock synchronisation, including a synchronised Ethernet clock output.The DP83867 has low latency and provides IEEE 1588 frame start detection.

The DP83867CSRGZR is a low-power design, consuming only 457mW at full power operation.Wake-on-LAN can be used to reduce system power consumption.

DP83867CSRGZR——Product Features:

Ultra-low latency, TX < 90ns, RX < 290ns

Time Sensitive Network (TSN) compliant

Low power consumption: 457mW

Exceeds 8000V IEC 61000-4-2 ESD protection rating

Complies with EN55011 Class B emission standard

16 programmable RGMII delay modes on RX/TX

Integrated MDI termination resistor

Programmable MAC interface termination impedance

WoL (Wake-on-LAN) packet detection

25MHz or 125MHz synchronous clock output

IEEE 1588 timestamp frame start detection

RJ45 mirrored mode

Fully compliant with IEEE 802.3 10BASE-Te, 100BASE-TX and 1000BASE-T specifications

Cable diagnostics

RGMII and SGMII MAC interface options

Configurable I/O voltage (3.3V, 2.5V, 1.8V)

Fast link disconnect mode

JTAG support

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.