Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

The Marvell® Alaska C 88X5111-A1-BVV4C000 is a fully integrated single chip port Ethernet transceiver that performs all physical layer functions required for 100 Gbps Ethernet Gearbox functionality, and drive 100 Gbps full duplex transmission, over a variety of media including optics, backplanes and passive copper cables. Manufactured with 28 nanometer lithography, in a 17mmx17mm package footprint, the Marvell 88X5111 enables low-power dissipation, high-density 100GbE card designs. The line interface of the 88X5111 is fully compliant to the IEEE 802.3BJ standard that defines the physical layer specifications for 100 Gbps Ethernet transmission over backplanes and copper cables. The device supports the Reed Solomon Forward Error Correction (RS-FEC) function required for 100G-CR4, 100G-KR4, and 100G-SR4 operation, as well as auto-negotiation and coefficient-training protocol required by the IEEE 802.3.The device also supports the Multilink Gearbox (MLG) functionality specified by the OIF MLG 2.0 specifications. The MLG functionality enables aggregation of 10 independent streams of 10 Gbps Ethernet or two independent streams of 40 Gbs Ethernet onto a 4x25 Gbps stream. The 88X5111 connects to a MAC or switch on its host interface over a 10x10 Gbps CAUI-10 link. The transmit drive and receiver equalization capabilities of the host interface meet the requirements of to 10GBase-KR specifications, significantly exceeding CAUI-10 requirements.

KEY FEATURES

• Single port 100GbE Gearbox

• Multilink Gearbox (MLG) compliant to OIF MLG 2.0 specifications

• Line interface SERDES that exceeds the equalization requirements for 100G-CR4 passive copper cables and 100GKR4 backplanes

• Long reach host interface SERDES that exceeds IEEE CAUI requirements

• Fully autonomous adaptive equalization on line and host receiver

• Support for auto-negotiation and transmitter coefficient training protocol

• Support for IEEE 802.3BJ Reed- Solomon Forward Error Correction (R-S FEC) functionality required for driving 100GCR4 passive copper cables, 100G- KR4 backplanes and 100GSR4 MMF modules

• Recovered clock outputs for SyncE applications

• Ethernet packet and programmable packet generation and checking capabilities

• Hardware interrupt pins for per port hardware interrupt generation capability

• Non-destructive Eye monitoring capability on all high speed lanes

• Clause 45 MDC/MDIO management interface

• Junction temperature range of 0 to 105°

• Small 17mm x 17mm FCBGA package

APPLICATIONS

• 100GbE Data center switches

• 100G-KR4 backplanes

• 10GbE/40GbE port expanders

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.