Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

The VNH5050ATR-E is a full-bridge motor driver for a wide range of automotive applications. The device integrates a dual monolithic high-side driver and two low-side switches. All switches are designed using ST's® well known and proven patented VIPower® M0 technology, which allows efficient integration of true power MOSFETs and intelligent signalling/protection circuits on the same chip. The three die are assembled in the PowerSSO-36 TP package and placed on an electrically isolated lead frame. This package is specifically designed for harsh automotive environments and offers better thermal performance due to the exposed die pads. In addition, its fully symmetrical mechanical design allows for greater manufacturability at board level. The input signals INA and INB can be connected directly to the microcontroller to select the motor direction and braking state. DIAGA/ENA or DIAGB/ENB, when connected to an external pull-up resistor, enable one leg of the bridge. Each DIAGA/ENA also provides a digital diagnostic feedback signal. Normal operating states are described in the truth table.The CS pin monitors motor current by providing a current proportional to its value when the CS_DIS pin is driven low or held open. When CS_DIS is driven high, the CS pin is in a high impedance state. PWM up to 20 KHz allows the motor speed to be controlled under all possible conditions. In any case, the low state of the PWM pin closes the LSA and LSB switches.

All features

Output current: 30 A

3 V CMOS compatible input

Undervoltage and overvoltage shutdown

Overvoltage clamp

Thermal shutdown

Cross-conduction protection

Current and power limiting

Very low standby power consumption

PWM operation up to 20KHz

Protection against loss of ground and loss of VCC

Current-sensing output proportional to motor current

Output protected against short to ground and short to VCC

Package: ECOPACK®

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.