Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

The Intel° Ethernet Connection C827 and XL827 family of retimers extends the reach of the Ethernet signals.  Retimers enable system designers to optimize PCB material cost for longer channel routes on server and embedded designs. 

These products offer three design options:

• 1x 100GbE or 4x 25GbE retimer at industrial temperature operation 

• 1x 100GbE or 4x 25GbE retimer at commercial temperature operation 

• 1x 40GbE or 4x 10GbE retimer at commercial temperature operation

By supporting a wide variety of IEEE and industry specifications for Ethernet, these retimers also enable maximum compatibility to Physical Layer (PHY) media types.  The retimers also support Common Public Radio Interface (CPRI) to extend the reach between a base station and radio transceiver. 

Unlike a redriver, these retimers are capable of recovering and reclocking the data.  The retimers support Physical Media Dependent (PMD) control function for BASE-R training and Clause 73 Auto-Negotiation, and enable Forward Error Correction (FEC) independent of the host controller. 

With the Intel Ethernet Connection C827 and XL827 family of retimers, the designer can expect a consistent link behavior compliant to IEEE specifications, and eliminate the requirement to manually tune the link on individual channels.

Key Features

• Single port 100GbE to10OGbE retimer

• Four port 25GbE to25GbE retimer

• Single port 40GbE to40ĞbE retimer

• Four port 10GbE to10GbE retimer

• Supports independent lane speeds

•CPRI Specification V7.0

• Forward Error Correction (FEC)

• Physical Media Dependent (PMD) training

• Synchronous Ethernet (SyncE)

• Auto-negotiation

• 2.6 W (typical) at 4x 25GbE

• 14mm x 14mm FCBGA package

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.