Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

The TMS320C6452CUT9 Digital Signal Processor (DSP) is a high-performance fixed-point DSP generation on the TMS320C6000™ DSP platform. The C6452 device is based on the advanced third-generation high-performance VelociTI™ Ultra-Long Instruction Word (VLIW) architecture. At a clock rate of 900MHz, the device performs up to 7,200 MIPS (million instructions per second).

Product: TMS320C6452CUT9

Core: C64x

Package: FCBGA-529

Operating temperature: 0°C ~ 90°C

The TMS320C6452 DSP has a 3-port Gigabit Ethernet switch subsystem, two telecom serial interface ports (TSIP0/1), and a UART with RTS and CTS flow control. This device is ideal for medical diagnostics, machine vision/inspection, radar and sonar, military/aerospace, and communications.

Features:

High Performance digital Media Processor:

C64x+™ Clock rate: 720MHz, 900MHz

Instruction cycle time: 1.39ns (-720) and 1.11ns (-900)

MIPS: 5760, 7200

Eight 32-bit C64x+ instructions per cycle

Software is fully compatible with C64x/ debugging

Commercial temperature range (-720 and -900 only)

Industrial temperature range (-720 and -900 only)

Velociti.2 ™ Extends to VelociTI™ Advanced Ultra-Long Instruction Word (VLIW) TMS320C64x+™ DSP core:

Eight highly independent functional units with VelociTI.2 extensions:

Six ALUs (32-bit / 40-bit), each supporting a single 32-bit, two 16-bit, or four 8-bit operations per clock cycle

Two multipliers that support four 16x16-bit multiplications per clock cycle (32-bit results) or eight 8x8-bit multiplications per clock cycle (16-bit results)

Support for a non-aligned load-and-save architecture

64 32-bit general-purpose registers

Instruction compression reduces code size

All instructions required

C64x+™ Additional enhancements:

Protected mode operation

Exceptions support error detection and program redirection

It provides hardware support for the operation of the die ring autofocus module

C64x+ Instruction set features:

Byte addressable (8/16/32/64 bit data)

8-bit overflow protection

Bit field extraction, setting, clearing

Normalization, saturation, and bit counting

VelociTI.2 Enhanced orthogonality

C64x+ Extensions:

Compact 16-bit instruction

Additional instructions to support complex multiplication

C64x+ L1/L2 memory architecture:

256K bit (32K bytes) L1P program RAM/ Cache (Direct mapping)

256K bits (32K bytes) L1D Data RAM/ Cache (2-way group association)

1408KB L2 Unified Mapped RAM/ Cache (flexible allocation)

Only the small-end mode is supported

External Memory Interface (EMIF) :

32-bit DDR2 SDRAM memory controller with 512MB address space (1.8V I/O)

Asynchronous 16-bit Wide EMIF (EMIFA) :

The total address range is 128 MB bytes

Each CE space 64M byte address range

Seamless interface for connecting asynchronous memory (SRAM, flash and EEPROM)

Synchronous memory (SBSRAM and ZBT SRAM)

Supports connectivity with standard synchronization devices and custom logic (FPgas, CPLDS, ASics, etc.)

Enhanced Direct Memory Access (EDMA) Controller (64 independent channels)

3-port Gigabit Ethernet switch subsystem

Four 64-bit universal timers (each can be configured as two 32-bit timers)

One UART (with RTS and CTS flow control)

A 4-wire serial port interface (SPI) with two chip options

Master/slave Internal Integrated Circuit (I2C Bus™)

Two telecommunication serial interface ports (TSIP0/1)

Multichannel Audio Serial Port (McASP) :

Ten serializers and SPDIF (DIT) mode

16/32-bit Host Port Interface (HPI)

Advanced Event Triggering (AET) support

32-bit 33-/66MHz, 3.3V Peripheral Component Interconnect (PCI) master/slave interfaces comply with PCI specification 2.3

VLYNQ™ Interface (FPGA interface)

On-chip ROM boot loader

Individual power saving mode

Flexible PLL clock generator

Compatible with IEEE-1149.1 (JTAG™) boundary scan

32 general purpose I/O (GPIO) pins (reusable with other device functions)

Package:

529 Pin nFBGA package (suffix ZUT)

19mmx19mm, 0.8mm pitch BGA package

0.09μm/ Grade 6 Copper Metal Process (CMOS)

3.3V and 1.8V I/O, 1.2V internally (-720 and -900)

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.