sales@hkmjd.com
Service Telephone:86-755-83294757
Trade Name:MPQ5066GQV-AEC1
Data Manual:MPQ5066GQV-AEC1.pdf
Brand:MPS
Particular Year:23+
Package:QFN-22
Delivery Date:New and Original
Stock: 1000pcs
The MPQ5066GQV-AEC1 is a hot-swap protection device designed to protect the circuitry at the outputs from transients at the inputs. It also protects its inputs from accidental short circuits and transients from the outputs.
During startup, the slew rate at the outputs limits the inrush current. An external capacitor connected to the SS pin controls the slew rate. The maximum output load is current-limited using an inductive FET topology, and a low-power resistor from the ISET pin to ground controls the magnitude of the current limit. An internal charge pump drives the gate of the power device, giving the power FET an ultra-low on-resistance of 7 mΩ. The MPQ5066 includes an IMON option that generates a voltage proportional to the current through the power device, which is set by the IMON pin ground resistor.
Features
Integrated 7mΩ power MOSFETs
Adjustable current limit (5A to 15A)
Output Current Measurement
±10% current monitor accuracy
Fast response (200ns) for short circuit protection
PG Detector and FLTB Indication
PG answers low at VIN = 0V
Damaged MOSFET detection
External Soft Start
Undervoltage lockout
Thermal Protection
Available in QFN-22 (3mmx5mm) package
AEC-Q100 Level 1 package
Applications
Automotive infotainment systems
Automotive Cluster
Advanced Driver Assistance Systems
Automotive Systems
Model
Brand
Package
Quantity
Describe
ADI
LFCSP-32
3000
Hot-Swap Controller and Digital Power and Energy Monitor with PMBus Interface
ADI
LFCSP-32
3000
Hot-Swap Controller and Digital Power and Energy Monitor with PMBus Interface
ADI
LFCSP-32
3000
Hot-Swap Controller and Digital Power and Energy Monitor with PMBus Interface
TI
24-VFQFN
3000
Integrated Hot-Swap with Accurate Load Current Monitoring and Adjustable Transient Fault Management
TI
24-VFQFN
3000
Integrated Hot-Swap with Accurate Load Current Monitoring and Adjustable Transient Fault Management
TI
24-VQFN
3000
Smart eFuse - Integrated Hot-swap Protection With Adjustable Transient Fault Management
A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.
A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.
A: at present, our self-employed brands TI,ST,ADI,NXP,LATTICE,CYPRESS,INFINEON,XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.
A: You can inquire through the website, or by phone and email.
A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.
A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.
Monolithic Power Systems (MPS) is a high-performance analog semiconductor company headquartered in San Jose, California. Founded in 1997, the company has three core strengths; deep system-level and application knowledge, strong analog design expertise…
MP6632GR
MP6632GR - Three-Phase BLDC Motor DriversProduct OverviewsMP6632GR Three-Phase Brush Less DC (BLDC) Motor Drivers feature up to 1A of driving current and a 6V to 50V input voltage (VIN) range. These motor drivers offer built-in, configurable speed cur…MP6541AGQKT
MP6541AGQKT is a three-phase brushless direct current (BLDC) motor driver chip. The device integrates three half-bridges consisting of six n-channel power MOSFETs, as well as six pre-drivers, two gate drive supplies, and three current sampling amplifi…MPQ4325GRE-AEC1
The MPQ4325GRE-AEC1 is a synchronous buck switching regulator with configurable frequencies (200kHz to 2.5MHz). It has an internally integrated upper tube MOSFETs (HS-FET) and lower tube MOSFETs (LS-FET) that provide high efficiency output current (IO…MPQ79500FS-AEC1
The MPQ79500FS-AEC1 is a 6-channel voltage monitor designed for automotive safety applications. Each voltage monitor input can be configured with overvoltage (OV) and undervoltage (UV) thresholds for both high precision high frequency (HF) and low fre…MPM54313GBJ
The MPM54313GBJ is a fully integrated 3-way 3A power module with I2C interface. It provides a complete power solution with built-in start and shutdown sequencing controls, as well as integrated adjustable soft start (SS), compensation functions and va…MPC22164-130
The MPC22164-130 is a 130A, dual-phase, non-isolated, high-efficiency step-down power module. It integrates driver MOSFETs (DrMOS) and inductors for high efficiency and small footprint, making it ideal for server applications.The device provides two i…Contact Number:86-755-83294757
Enterprise QQ:1668527835/ 2850151598/ 2850151584/ 2850151585
Business Hours:9:00-18:00
E-mail:sales@hkmjd.com
Company Address:Room1239, Guoli building, Zhenzhong Road, Futian District, Shenzhen, Guangdong
CopyRight ©2022 Copyright belongs to Mingjiada Yue ICP Bei No. 05062024-12
Official QR Code
Links: