Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

The ACS756KCB-050B-PFF-T Current Sensor IC provides an affordable and accurate solution for AC or DC current measurement in industrial, automotive, commercial and communication systems. The devices are packaged for user-friendly applications. Common applications include motor control, load detection and management, power supply and overcurrent fault protection.

The device consists of a low-bias precision linear Hall sensor circuit with a copper current path near the surface of the wafer. The current applied through the copper current path generates a magnetic field that can be sensed by the integrated Hall IC and converted into a proportional voltage. Device accuracy is optimised by placing the magnetic signal close to the Hall sensor. The precise proportional voltage is provided by a stable chopper-type low bias BiCMOS Hall IC that is factory programmed for accuracy.

When increasing the current in the primary copper conducting path (for current sensing) from terminal 4 to terminal 5, the output of the device has a positive slope (>VCC / 2). The internal resistance of this conductive path is 130 μΩ typical, with low power losses.

The thickness of the copper wire allows the device to operate at up to 5 times the overcurrent. The terminals of the current path are electrically insulated from the sensor pins (pins 1 to 3). This allows the ACS756 Sensor IC family to be used in applications that require electrical insulation but do not use photoinsulators or other expensive insulation techniques.

Key Features

Industry-leading noise performance through patented amplifier and filter design process

0.8% total output error rate at TA = 25°C

Small package size for easy installation

Highly reliable monolithic Hall ICs

Ultra-low power loss: 130 µΩ internal conduction resistance

Minimum isolation voltage of 3 kVRMS for pins 1-3 to 4-5

3.0 - 5.0 V, single-supply operation

Output rise time of 3 µs for stepped input currents

20 or 40 mV/A output sensitivity

Output voltage proportional to AC or DC current

Factory calibrated for accuracy

Extremely stable output offset voltage

Near-zero hysteresis

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.