Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

The ACS37610LLUATR-005B5 provides a highly accurate method of measuring currents from 100 A to >4000 A flowing through busbars or PCBs without the need for concentrator cores or U-shape magnetic shielding, reducing system complexity, bill of materials (BOM), cost, footprint, and weight. Differential measurements provide excellent immunity to stray magnetic fields without the need for magnetic shielding, which typically slows response time and increases nonlinear errors.

The ACS37610LLUATR-005B5 uses advanced Hall elements to improve signal-to-noise ratio (SNR) by a factor of 2.5 and reduce noise by a factor of 2 compared to the ACS37612, while achieving 1% typical accuracy over the extended ambient temperature range of -40°C to 150°C. The ACS37610LLUATR-010B5 is designed to meet the requirements of the ACS37612. The lower noise provides the excellent resolution needed for precise torque control, while the sensor sensitivity range has been increased by a factor of 4, allowing for flexible busbar and PCB designs.

Product Attributes

For measurement: AC/DC  

Sensor type: Hall effect   

Number of channels: 1  

Output: Voltage  

Sensitivity: 60mV/mT  

Frequency: DC ~ 250kHz  

Linearity: ±0.15%  

Accuracy: ±5%  

Voltage - Supply: 4.5V ~ 5.5V  

Response Time: 1.6µs  

Current - Supply (Max): 21mA  

Operating Temperature: -40°C ~ 150°C (TA)  

Rating: Automotive Grade  

Qualification: AEC-Q100  

Polarisation: Bidirectional  

Mounting Type: Surface Mount  

Package/Shell: 8-TSSOP (0.173", 4.40mm Width)  

Supplier Device Package: 8-TSSOP

Typical Applications

Automotive 

High voltage traction motor inverters 

48 V / 12 V auxiliary inverter (starter generator) 

Heterogeneous redundant battery monitoring 

Overcurrent detection 

DC/DC converter 

Smart Fuses 

Power Distribution Units (PDU) 

Industrial 

Switching Power Supplies 

DC/DC Converters 

DC/AC Inverters 

Grid Infrastructure and Distribution

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.