Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

5M160ZM100C5N contain a two-dimensional row- and column-based architecture to implement custom logic. Row and column interconnects provide signal interconnects between the logic array blocks (LABs).

The following list summarizes the MAX V device family features:

Low-cost, low-power, and non-volatile CPLD architecture

Instant-on (0.5 ms or less) configuration time

Standby current as low as 25 µA and fast power-down/reset operation

Fast propagation delay and clock-to-output times

Internal oscillator

Emulated RSDS output support with a data rate of up to 200 Mbps

Emulated LVDS output support with a data rate of up to 304 Mbps

Four global clocks with two clocks available per logic array block (LAB)

User flash memory block up to 8 Kbits for non-volatile storage with up to 1000 read/write cycles

Single 1.8-V external supply for device core

MultiVolt I/O interface supporting 3.3-V, 2.5-V, 1.8-V, 1.5-V, and 1.2-V logic levels

Bus-friendly architecture including programmable slew rate, drive strength, bus-hold, and programmable pull-up resistors

Schmitt triggers enabling noise tolerant inputs (programmable per pin)

I/Os are fully compliant with the PCI-SIG® PCI Local Bus Specification, revision 2.2 for 3.3-V operation

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.