Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

The NCV7710DQBR2G is a powerful driver IC for body control systems. The IC is used to control the door lock motors in the car doors. The IC uses a monolithic full-bridge driver stage to achieve control of the door lock motors. The control is carried out via a 24-bit SPI interface with inter-frame response.

Features

Operating voltage range of 5.5 V to 28 V

Two high voltage and two low voltage drivers connected as half-bridges

- 2 half-bridges Iload = 6 A; Rdson = 150 mΩ @ 25°C

Programmable soft-start function to drive loads with high inrush currents at current-limited values

Supports PWM control frequency outside the audible noise range

Supports active current continuation to reduce power consumption

Multiple current-sense analogue outputs for advanced load monitoring

Very low current consumption in standby mode

Charge pump output for controlling external reverse polarity protected MOSFETs

24-bit SPI interface for output control and diagnostics

Short-circuit, overvoltage and over-temperature protection

Downward pin-to-pin and SPI register compatibility with NCV7707

Applications

Non-Centralised Door Electronics

Rear Door Electronics Unit

Body Control Unit (BCU)

Multiple H-Bridge Applications

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.