Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

Product Introduction:

The TMS320F2808PZA device features a low-power 1.8V core, 3.3V I/O, and high-performance static CMOS technology. It is a C2000™ 32-bit MCU with 100MHz frequency, 128kB flash memory, and 12-channel PWM. The TMS320F2808 is part of a highly integrated, high-performance solution designed for demanding control applications.

Product: TMS320F2808PZA

Type: C2000 real-time microcontroller

Frequency: 100MHz

Package: LQFP-100

Applications: Motor drive and control, digital power supply

Block diagram:

Features:

High performance static CMOS technology

100MHz (10ns cycle time)

60MHz (16.67ns cycle time)

Low power (1.8V core, 3.3V I/O) design

JTAG boundary scan is supported

IEEE standard 1149.1-1990 standard tests access port and boundary scan architectures

High Performance 32-bit CPU (TMS320C28x)

16x16 and 32x32 MAC operations

16x16 dual MAC

Harvard bus architecture

Conjunctive operation

Fast interrupt response and handling

Unified memory programming model

Efficient code (using C/C++ and assembly language)

On-chip memory

F2809:128K x 16 flash, 18K x 16 SARAM

F2808:64K x 16 flash, 18K x 16 SARAM

F2806:32K x 16 flash, 10K x 16 SARAM

F2802:32K x 16 flash, 6K x 16 SARAM

F2801:16K x 16 flash, 6K x 16 SARAM

F2801x: 16K x 16 flash memory, 6K x 16 SARAM

1K x 16 OTP ROM (Flash memory devices only)

C2802:32K x 16 ROM, 6K x 16 SARAM

C2801:16K x 16 ROM, 6K x 16 SARAM

Boot ROM (4K×16)

Software boot mode (via SCI, SPI, CAN, I2C and parallel I/O)

Standard mathematical table

Clock and system control

On-chip oscillator

Watchdog timer module

Any GPIO A pin can be connected to one of three external kernel interrupts

Peripheral Interrupt Extension (PIE) module that supports all 43 peripheral interrupts

Byte order: small end order

128-bit security key/lock

Protect flash /OTP/L0/L1 blocks

Prevents firmware reverse engineering

Three 32-bit CPU timers

Enhanced control peripherals

Up to 16 PWM outputs

Up to 6 HRPWM outputs with 150ps MEP resolution

Up to 4 capture inputs

Up to 2 orthogonal encoder interfaces

Up to 6 32-bit /6 16-bit timers

Serial port peripherals

Up to 4 SPI modules

Up to 2 SCI (UART) modules

Up to 2 CAN modules

An internal integrated circuit (I2C) bus

12-bit ADC, 16 channels

2 x 8 channel input multiplexer

Two samples and hold

Single/synchronous conversion

Fast conversion rate:

80ns-12.5MSPS (F2809 only)

160ns-6.25MSPS (280x)

267ns - 3.75MSPS (F2801x)

Internal or external benchmarks

Up to 35 individually programmable multiplexed GPIO pins with input filtering

Advanced simulation features

Analysis and breakpoint capabilities

Real-time debugging through hardware

Development support content

ANSI C/C++ compiler/assembler/linker

Code Composer Studio™ IDE

SYS/BIOS

Digital motor control and digital power supply software library

Low power mode and energy saving

The IDLE, STANDBY, and HALT modes are supported

Disable a single peripheral clock

Encapsulation option

Flat Square (PZ)

MicroStar BGA™ (GGM, ZGM)

Temperature option

A: -40°C to +85°C (PZ, GGG, ZGM)

S: -40°C to +125°C (PZ, GGG, ZGM)

Q: -40°C to +125°C (PZ)

(Compliant with AEC-Q100 standard for automotive applications)