Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

The TMS320F2802PZQ is an automotive-class C2000 ™ 32-bit MCU with 100 MHz frequency, 64 KB flash, 6-channel PWM.

Instructions:

The TMS320F2802-Q1 is part of a highly integrated, high-performance solution designed for demanding control applications. The device uses a low-power 1.8V core, 3.3V I/O, and high-performance static CMOS technology.

Parameters:

Product: TMS320F2802PZQ

Core processor: C28x

Kernel specification: 32-bit single-core

Speed: 100MHz

Connection capability: CANbus, I2C, SCI, SPI, UART/USART

Peripheral: POR, PWM, WDT

Number of I/ OS: 35

Program storage capacity: 64KB (32K x 16)

Program memory type: Flash

EEPROM capacity: -

RAM size: 6K x 16

Voltage - supply (Vcc/Vdd) : 1.71V ~ 1.89V

Data converter: A/D 16x12b

Oscillator type: Internal

Operating temperature: -40°C ~ 125°C (TA)

Class: Automobile class

Qualification: AEC-Q100

Mounting type: Surface mount type

Supplier Device Package: 100-LQFP (14x14)

Package/case: 100-LQFP

Block diagram:

Features:

High performance static CMOS technology

100MHz (10ns cycle time)

60MHz (16.67ns cycle time)

Low power (1.8V core, 3.3V I/O) design

JTAG boundary scan is supported

IEEE standard 1149.1-1990 standard tests access port and boundary scan architectures

High Performance 32-bit CPU (TMS320C28x)

16 x 16 and 32 x 32 MAC operations

16 x 16 dual MAC

Harvard Bus architecture

Conjunctive operation

Fast interrupt response and handling

Unified memory programming model

Efficient code (using C/C++ and assembly language)

On-chip memory

F2809:128K x 16 flash memory, 18K x 16 SARAM

F2808:64K x 16 flash memory, 18K x 16 SARAM

F2806:32K x 16 flash, 10K x 16 SARAM

F2802:32K x 16 flash memory, 6K x 16 SARAM

F2801:16K x 16 flash memory, 6K x 16 SARAM

F2801x: 16K × 16 flash memory, 6K × 16 SARAM

1K × 16 OTP ROM (for flash memory devices only)

C2802:32K × 16 ROM, 6K × 16 SARAM

C2801:16K × 16 ROM, 6K × 16 SARAM

Boot ROM (4K × 16)

Software boot mode (via SCI, SPI, CAN, I2C and parallel I/O)

Standard mathematical table

Clock and system control

On-chip oscillator

Watchdog timer module

Any GPIO A pin can be connected to one of three external kernel interrupts

Peripheral Interrupt Extension (PIE) blocks that support all 43 peripheral interrupts

Byte order: byte order of the small end

128-bit security key/lock

Protect flash /OTP/L0/L1 blocks

Prevents firmware reverse engineering

3 32-bit CPU timers

Enhanced control peripherals

Up to 16 PWM outputs

Up to 6 HRPWM outputs at 150ps MEP resolution

Up to 4 capture inputs

Up to 2 orthogonal encoder interfaces

Up to 6 32-bit /6 16-bit timers

Serial port peripherals

Up to 4 SPI modules

Up to 2 SCI (UART) modules

Up to 2 CAN modules

1 internal integrated circuit (I2C) bus

12 bit ADC, 16 channels

2 x 8 channel input multiplexer

Two sample hold

Single/synchronous conversion

Fast conversion rate:

80ns-12.5MSPS (F2809 only)

160ns-6.25MSPS (280x)

267ns-3.75 MSPS (F2801x)

Internal or external benchmarks

Up to 35 individually programmable multiplexed GPIO pins with input filtering

Advanced simulation features

Analysis and breakpoint capabilities

Through real-time debugging of hardware

Development support includes

ANSI C/C++ compiler/assembler/connector

Code Composer Studio™IDE project sample source code

SYS/BIOS

Digital motor control and digital power supply software library

Low power mode saves energy

Supports idle, standby, and stop modes

Disable a separate peripheral clock

Encapsulation option

Thin Square Flat Package (PZ)

MicroStar BGA™(GGM, ZGM)

Temperature option

A: -40°C to 85°C (PZ, GGM, ZGM)

S: -40°C to 125°C (PZ, GGM, ZGM)

Q: -40°C to 125°C (PZ)

(Certified AEC-Q100 for automotive applications)

Applications:

Motor drive and control

Digital power supply