Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

Overview:

AWRL6432-Q1 Automotive mmWave radar sensor is an integrated single-chip mmWave sensor based on FMCW radar technology. These radar sensors are AEC-Q100 certified for automotive applications and operate in the 57GHz to 63.9GHz coverage range with a continuous bandwidth of 7GHz. The AWRL6432-Q1 radar sensor is divided into four power domains, such as the RF/analog subsystem, the Front-end Controller Subsystem (FECSS), the Application subsystem (APPSS) and the Hardware Accelerator (HWA). These radar sensors have built-in firmware and a built-in LDO network that enhances the PSRR. The radar sensor supports several low-power modes, such as idle mode and deep sleep mode. The low power sleep mode is achieved by clock gating and turning off the internal IP module of the device. Typical applications include in-car sensing, child presence detection, occupant detection, seat belt reminders, intruder detection, gesture-based human interface, and driver vital signs monitoring.

AWRL6432BDBAAMFRQ1

Parameters

Type: Automotive radar sensor

Core: ARM Cortex M4F

Operating frequency: 57 GHz to 64 GHz

Maximum data rate: 400 Mb/s

Output power: 11 dBm

Supply voltage - Minimum: 1.14V

Power supply voltage - Max: 1.26V

Program memory size: 1 MB

Minimum operating temperature: -40 °C

Maximum operating temperature: + 125°C

Package/box: FCCSP-102

ADC resolution: 12 bit

Data RAM size: 512 kB

Data Ram type: RAM

Height: 0.97mm

Interface type: CAN, I2C, SPI, UART

Length: 6.55 mm

Max clock frequency: 160 MHz

Installation style: SMD/SMT

Working power supply voltage: 1.2V

Product type: RF System on a Chip-SoC

Series: AWRL6432

Width: 6.55mm

Applications

- Interior sensing

- Presence detection of children

- Occupant detection

- Driver vitals monitoring

- Seat belt reminder.

- Gesture-based human-machine interface

If interested, please contact Mr. Chen:

Tel: +8613410018555

Email: sales@hkmjd.com