Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

The RS9116W-DB00-AB1 is an 802.11b /g/n dual-band (2.4/5 GHz), dual-mode Bluetooth 5 Wi-Fi module.

Introduction

The RS9116 wireless module is a single - and dual-band module that provides a comprehensive multi-protocol wireless connectivity solution, including Wi-Fi and dual-mode Bluetooth 5. Wireless modules with power-optimized performance provide high data throughput and extended range. The wireless module has passed FCC, IC and ETSI/CE certification.

RS9116 General specification：

Wi-Fi

Compliant with single-space streaming IEEE 802.11a /b/g/n, single-band (2.4GHz) and dual-band (2.4/5 GHz) support

Supports 20 MHz channel bandwidth

Transmit power up to +18 dBm with integrated power amplifier

Reception sensitivity as low as -96 dBm

Data rate: 802.11b: up to 11 Mbps; 802.11g/a: up to 54 Mbps; 802.11n: MCS0 to MCS7

Operating frequency range:

2412 MHz - 2484 MHz; 4.9GHz to 5.975 GHz

Bluetooth low energy products community support

Compliant with dual-mode Bluetooth 5

Transmit power up to +16 dBm with integrated power amplifier

Reception sensitivity: LE: -92 dBm, LR 125 Kbps: -102 dBm

<8 mA transmission current (in Bluetooth 5 mode),

2 Mbps data rate

Data rates: 125 kbps, 500 kbps, 1 Mbps, 2 Mbps, 3 Mbps

Operating frequency range:

2402 MHz - 2480 GHz

EDR +2.1, 4.0, 4.1, 4.2 and 5.0

Bluetooth low power 1 Mbps, 2 Mbps and long range modes

Bluetooth low power secure connection

Bluetooth Low power supports eight core roles and two peripheral roles simultaneously

Bluetooth automatic rate and automatic transmission power adaptation

Scatternet * comes with two slave characters while still visible.

Bluetooth built-in stack support for L2CAP, RFCOMM, SDP, SPP, GAP

Bluetooth profile support for GAP, SDP, L2CAP, RFCOMM, SPP, GATT, PBAP

Radio frequency function

Integrated baseband processor with calibrated memory, RF transceiver, high power amplifier, balanced-unbalanced converter and transceiver switch

Power dissipation

Wi-Fi Standby Association mode current:

50 μA (at 1 second beacon broadcast interval)

Wi-Fi 1 Mbps listening current: 14 mA

Wi-Fi LP chain Rx current: 19 mA

Deep sleep current < 1μA, standby current (off mode) < 10μA

Embedded mode

Embedded mode: Wi-Fi protocol stack, TCP/IP protocol stack, IP module, Bluetooth protocol stack resides in RS9116; Some Bluetooth profiles reside in the host processor

Available host interfaces: UART, SPI, SDIO*, USB-CDC

TCP throughput > 20Mbps (20 MHz bandwidth via SDIO* host interface)

Supports embedded client mode, Access point mode (up to 8 clients), concurrent client and access point mode, and enterprise security

Support for advanced security features: WPA/WPA2 - Personal and Enterprise editions *

Integrated TCP/IP stack (Ipv4/Ipv6), HTTP/HTTPS, DHCP, ICMP, SSL 3.0/TLS1.2, WebSocket, IGMP, DNS, DNS-SD, SNMP, FTP client, MQTT*

Wireless firmware upgrade and configuration

Support concurrent Wi-Fi, dual-mode Bluetooth 5

Working condition

Wide power supply operating range: 1.75V to 3.63V

Operating temperature: -40 °C to +85 °C (Industrial grade)

Wireless coexistence mode

Wi-Fi access Point + Wi-Fi client

Wi-Fi Client + Bluetooth Classic (EDR v 2.1)

Wi-Fi client + Bluetooth low power consumption

Wi-Fi access point + Bluetooth low power

secure

Accelerator: AES128/256 in embedded mode

WPA/WPA2- Personal, WPA/WPA2 Enterprise client *

Security firmware upgrade * with backup

Software and regulatory certification

Bluetooth qualification

Regulatory certification (FCC, IC, CE/ETSI, TELEC)

Shenzhen Mingjiada Electronics Co., LTD. (recycling, supply) RS9116W-DB00-AB1 Wi-Fi and dual-mode Bluetooth 5 wireless communication module.

Contact: Mr. Chen

Tel: +8613410018555

Email: sales@hkmjd.com