Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

DP83867IRRGZR is a durable gigabit Ethernet PHY transceiver with an industrial-grade temperature range.

Performance parameters

The DP83867IRRGZR has the following key parameters:

Type: Ethernet Transceiver

Standards: 10BASE-TE, 100BASE-TX, 1GBASE-T

Number of transceivers: 1 Transceiver

Data rates: 10 Mb/s, 100 Mb/s, 1 Gb/s

Interface types: GMII, MII, RGMII

Power supply voltage - minimum: 1V, 1.8V, 2.5V

Power supply voltage - Maximum: 1V, 1.8V, 2.5V

Minimum operating temperature: -40 ° C

Maximum operating temperature: + 85 ° C

Series: DP83867IR

Package/Box: VQFN-48

Application scenarios

The DP83867IRRGZR is suitable for various industrial and commercial applications that require high reliability and anti-interference capabilities, such as:

Motor driver

"Factory automation"

• Fieldbus support

• Industrial embedded computing

Wired and wireless communication infrastructure

• Testing and measurement

Consumer electronic products

Product Introduction

The DP83867IRRGZR device is a robust low-power full-function physical layer transceiver. It integrates the PMD sub-layer to support the 10BASE-Te, 100BASE-TX and 1000BASE-T Ethernet protocols. The DP83867IRRGZR has been optimized to provide ESD protection, exceeding the 8kV IEC 61000-4-2 standard (direct contact).

The DP83867IRRGZR can easily achieve 10/100/1000Mbps Ethernet LAN. This device is directly connected to the twisted-pair dielectric through an external transformer. The DP83867IRRGZR is directly connected to the MAC layer via the IEEE 802.3 Standard Media Independent Interface (MII), IEEE 802.3 Gigabit Media Independent Interface (GMII), or Simplified GMII (RGMII). The DP83867IRRGZR device supports RGMII.

The DP83867IRRGZR offers precise clock synchronization, including a synchronized Ethernet clock output. This device has low latency and provides IEEE 1588 frame start detection.

When operating at full power, the DP83867IRRGZR only consumes 490mW (PAP) and 457mW (RGZ). Local area network wake-up can be used to reduce system power consumption.

The main features of the DP83867IRRGZR Ethernet transceiver include:

Ultra-low RGMII latency, TX < 90ns, RX < 290ns

Complies with the Time-Sensitive Networking (TSN) standard

Low power consumption: 457mW

More than 8000V IEC 61000-4-2 ESD protection level

Complies with the EN55011 Class B emission standard

16 programmable RGMII latency modes are provided on RX/TX

Integrate MDI terminal resistors

Programmable MII/GMII/RGMII termination impedance

WoL (Local Area Network Wake-up) packet detection

Synchronous clock output of 25MHz or 125MHz

IEEE 1588 timestamp frame start detection

RJ45 Mirror mode

It fully complies with the IEEE 802.3 10BASE-Te, 100BASE-TX and 1000BASE-T specifications

Cable diagnosis

MII, GMII and RGMII MAC interface options

Configurable I/O voltage (3.3V, 2.5V, 1.8V)

Fast link disconnection mode

JTAG support

If you need to obtain [DP83867IRRGZR] product quotation information, welcome to contact Mingjiada electronic team online by visiting www.hkmjd.com!