Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

NXP S9S08DZ60F2VLCR 40MHz 8-Bit Microcontroller IC

As a leading supplier of electronic components in China, Shenzhen Mingjiada Electronics Co., Ltd. has been supplying NXP S9S08DZ60F2VLCR 8-bit microcontrollers for a long time to provide cost-effective embedded solutions for customers in the fields of industrial control, automotive electronics and Internet of Things.

NXP S9S08DZ60F2VLCR 8-Bit MCU Product Overview

The S9S08DZ60F2VLCR is a line of high performance 8-bit microcontrollers for the automotive electronics and industrial control markets.

The S9S08DZ60F2VLCR microcontrollers feature an advanced S08 core architecture running at up to 40MHz with a 20MHz bus frequency, providing excellent processing performance among 8-bit MCUs.The S9S08DZ60F2VLCR is highly integrated with rich embedded storage resources, including up to 128KB of Flash program memory (read/program/erase operation over the entire operating voltage and temperature range), 2KB of EEPROM in-circuit programmable memory, and 8KB of RAM space, providing a better storage configuration than competing products.

The S9S08DZ60F2VLCR is the industry's first product line to integrate an embedded CAN interface in an 8-bit microcontroller with both EEPROM and on-chip emulation/debug capabilities. This innovative design makes the S9S08DZ60F2VLCR ideal for automotive electronics network communications and industrial control networks.

Specification Of S9S08DZ60F2VLCR

Core Processor：S08

Core Size：8-Bit

Speed：40MHz

Connectivity：CANbus, I2C, LINbus, SCI, SPI

Peripherals：LVD, POR, PWM, WDT

Number of I/O：25

Program Memory Size：60KB (60K x 8)

Program Memory Type：FLASH

EEPROM Size：2K x 8

RAM Size：4K x 8

Voltage - Supply (Vcc/Vdd)：2.7V ~ 5.5V

Data Converters：A/D 10x12b

Oscillator Type：External

Operating Temperature：-40°C ~ 105°C (TA)

Features Of S9S08DZ60F2VLCR

40 MHz core speed, 20 MHz bus speed on S08 CPU

HC08 instruction set with added BGND instruction

Up to 128 KB flash read/program/erase over full operating voltage and temperature

Up to 2 KB EEPROM in-circuit programmable memory; 8-byte single-page or 4-byte dualpage erase sector; program and erase while executing flash; erase abort

Up to 8 KB RAM (16:1 flash/RAM, ratio better than competition)

Two very low-power stop modes

Very low-power, real-time interrupt for use in run, wait and stop modes

Oscillator (XOSC)—Loop-control Pierce oscillator; crystal or ceramic resonator range of 31.25 kHz–38.4 kHz or 1 MHz–16 MHz

Multi-purpose clock generator (MCG)–PLL and FLL modes; internal reference clock with trim adjustment; external reference with oscillator/resonator options

Watchdog computer operating properly (COP) reset with option to run from dedicated 1 kHz internal clock source or bus clock

Low-voltage detection with reset or interrupt; selectable trip points

Illegal opcode detection with reset

Illegal address detection with reset

Flash block protect

EEPROM block protect

Watchdog computer operating properly (COP) reset with option to run from dedicated 1 kHz internal clock source or bus clock

Low-voltage detection with reset or interrupt; selectable trip points

Illegal opcode detection with reset

Illegal address detection with reset

Flash block protect

EEPROM block protect

Applications Of S9S08DZ60F2VLCR

Automotive Electronics

With its embedded CAN interface and AEC-Q100 certification, the S9S08DZ60F2VLCR is used in a wide range of automotive electronics applications:

Body control system: door module, seat control, window lift, etc.

Lighting systems: headlight control, interior lighting management.

Simple ECU unit: electronic control unit to meet basic control requirements

In-vehicle network node: as a sub-node device in the CAN network

Industrial control and automation

The S9S08DZ60F2VLCR's high reliability and rich peripherals make it ideal for industrial applications:

Industrial sensor nodes: support a variety of analogue signal acquisition and digital interfaces

Small PLC: realises basic logic control functions

Motor control: DC motor control with PWM module

Human-machine interfaces: simple push-button and display control

Consumer Electronics and Internet of Things

In the consumer field, the S9S08DZ60F2VLCR performs well with its low power consumption characteristics:

Home appliance control: main control for washing machines, microwave ovens and other home appliances

Smart meters: water meters, electricity meters and other metering devices

Simple IoT terminals: data acquisition and basic communication functions