Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

sales@hkmjd.com

英banner
Shenzhen  Mingjiada Electronics Co., Ltd.

Service Telephone:86-755-83294757

Product Classification

AI Processor Chip

AI Accelerators

Home /Company Dynamics /

Original Sale NXP Interface IC PCA9505DGGY 40-bit I2C Bus I/O Port with RESET, OE and INT

Original Sale NXP Interface IC PCA9505DGGY 40-bit I2C Bus I/O Port with RESET, OE and INT

Source:our siteTime:2024-01-22Views:

Shenzhen Mingjiada Electronics Co., Ltd. sells original NXP interface IC PCA9505DGGY 40-bit I2C bus I/O port with RESET, OE and INTPCA9505DGGY Device OverviewThe PCA9505 provides 40-bit parallel input/output (I/O) port expansion for IC bus application…

Shenzhen Mingjiada Electronics Co., Ltd. sells original NXP interface IC PCA9505DGGY 40-bit I2C bus I/O port with RESET, OE and INT


PCA9505DGGY Device Overview

The PCA9505 provides 40-bit parallel input/output (I/O) port expansion for I²C bus applications in 5 groups of 8 I/O. The outputs are capable of pulling out 10 mA and puddling in 15 mA at a 5 V supply voltage, allowing 40 LEDs to be directly driven at a total package load of 600 mA. Any of the 40 I/O ports can be configured as input or outputs. The output ports are totem pole and their logic state changes on Acknowledge (group change). The PCA9505 is identical to the PCA9506 except for the 100 kΩ internal pull-up resistors on all I/Os.


The device can be configured to mask each input port to prevent interrupts from being generated when its state changes, or to invert the I/O data logic state when read by the system master.


The open-drain interrupt output pin (1) allows the input pins to be monitored and specified each time one or more of the input ports changes (unless masked).


The output enable (1) pin can specify the tri-state of any I/O selected as an output and can be used as an input signal to blink or dim an LED (PWM with frequency > 80 Hz and changing duty cycle).


An internal power-on reset (POR) or hardware reset (1) pin initialises 40 I/Os as inputs. Three address selection pins configure one of eight slave addresses.


Product Attributes

Number of I/O: 40  

Interface: I2C  

Interrupt Output: Yes  

Characteristics: POR  

Output Type: Push-Pull  

Current - Sink/Pull Outputs: 10mA, 15mA  

Clock Frequency: 400 kHz  

Voltage - Supply: 2.3V ~ 5.5V  

Operating Temperature: -40°C ~ 85°C  

Mounting Type: Surface Mount  

Package/Housing: 56-TFSOP (0.240", 6.10mm Width)  

Supplier Device Package: 56-TSSOP


Target Applications

Servers

RAID systems

Industrial Controls

Medical devices

PLC

Mobile Phones

Gaming Machines

Instrumentation and Test & Measurement


Interested parties are welcome to contact Mr Chen by phone:

Tel: +86 13410018555

Email: sales@hkmjd.com

Company homepage: www.hkmjd.com

Company Introduction
About Us
News Information
Honorary Qualification
Inventory Query
Classification Query
Supplier Query
Help Center
Online Inquiry
Common Problem
Site Map
Contact us

Contact Number:86-755-83294757

Enterprise QQ:1668527835/ 2850151598/ 2850151584/ 2850151585

Business Hours:9:00-18:00

E-mail:sales@hkmjd.com

Company Address:Room1239, Guoli building, Zhenzhong Road, Futian District, Shenzhen, Guangdong

CopyRight ©2022 Copyright belongs to Mingjiada   Yue ICP Bei No. 05062024-12

Official QR Code

Brand Index:

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9

Links:

skype:mjdsaler