Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

Shenzhen Mingjiada Electronics Co., Ltd [Supply] [Recycling] NXP SPC5748GBK0AMMN6 Ultra-High Reliability MCUs for Automotive Electronics, Industrial Control and Gateway Applications

Device Overview

The SPC5748GBK0AMMN6 MCU provides a highly integrated single-chip security solution for next-generation central body control, gateway and industrial control applications.

Features

Performance

Up to two Power Architecture e200z4 dual-touch 32-bit cores

Maximum operating frequency 160 MHz

Single precision floating point

8 KB instruction cache and 4 KB data cache

Variable Length Encoding (VLE) for significant code density increase

Up to 1 Power Architecture e200z2 single-touch 32-bit core

Maximum operating frequency 80 MHz

Variable Length Encoding

Flash and SRAM

Up to 6 MB Flash with Error Correcting Coding (ECC)

3-Port Flash Controller

Up to 768 KB SRAM with ECC

3 RAM ports

Data Connectivity and Communications

10/100 Ethernet with 1588 and MII/RMII support

Multi-queue AVB support

Optional second 10/100 Ethernet module with Ethernet switch

Media LB (MLB150) support for 3-pin and 6-pin interfaces at speeds up to 2048 fs

One USB 2.0 Host (USBSPH) and one USB 2.0 Device (USBOTG) with ULPI support

One dual-channel FlexRay controller with 128 message buffers

18 LIN Flex (1 Master/Slave set, 17 Masters)

8 Enhanced FlexCAN modules with CAN FD support and configurable buffers

DMA support on RxFIFO per instance

Virtual network support on a single FlexCAN module at low power consumption

One Secure Digital Hardware Controller (µSDHC) with Secure Digital Input/Output (SDIO) and MMC support

4 I²C modules

3 Synchronised Audio Interfaces (SAI) capable of supporting 6 stereo audio channels

4 Deserial Peripheral Interface (DSPI) modules, providing additional features to support external SPI control of lamp/LED drivers

6 Serial Peripheral Interface (SPI) modules

Low Power

Low Power Unit (LPU) mode, allowing the e200z2 core to bypass the cross-switch in low power mode

Only a portion of the driver assembly is driven in LPU mode

3 analogue comparators providing 24 comparison inputs

Standby mode fully handles periodic monitoring routines

Virtual network support through advanced CAN filtering, wake-up functionality and availability in LPU mode

Safety and Security

Hardware Security Module (HSM) supports advanced security management

Designed for ISO 26262 processes to meet higher levels of ASIL systems

End-to-end error correction coding (ECC)

User-selectable memory built-in self-test (MBIST) and logic BIST (LBIST) functions

Can be enabled, independent of reset conditions and run-time status, or disabled

Fault Collection and Control Unit (FCCU) collects fault information and issues interrupt and reset commands based on severity

Voltage and clock monitor

If you have any request, please call Mr Chen:

Tel: +86 13410018555

Email: sales@hkmjd.com

Home URL:www.hkmjd.com