Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

Mingjiada Corporation supplies Serialiser/Deserialiser DS90UB953ATRHBTQ1 FPD-Link III 4.16Gbps Serialiser with CSI-2 interface, DS90UB953A-Q1 125°C for 2.3MP/60fps Camera, Radar, and other sensors.

Description

The DS90UB953ATRHBTQ1 serialiser is part of TI's FPD-Link III family of devices designed to support high-speed raw data sensors, including 2.3MP/60fps imagers, as well as 4MP/30fps cameras, satellite radar, lidar, and time-of-flight (ToF) sensors. Fully compliant with AEC-Q100 (Class 1), the device has a wide temperature range of -40°C to 125°C. The higher temperature helps to make the device a perfect fit for any small form factor. The higher temperature helps provide a more compact/flexible sensor module design for any small camera application. The chip offers a 4.16Gbps forward channel and an ultra-low latency 50Mbps bi-directional control channel, and supports a single coaxial (PoC) or STP cable for power supply.The DS90UB953A-Q1 features advanced data protection and diagnostics to support ADAS and autonomous driving. In combination with a companion deserialiser, the DS90UB953A-Q1 provides accurate multi-camera sensor clocking and sensor synchronisation.

Features

- Complies with AEC-Q100 (Class 1) for automotive applications:

- Device temperature: Ambient operating temperature range of -40°C to +125°C.

- Compliant with ISO 10605 and IEC 61000-4-2 ESD standards

- Power over Coax (PoC)-compatible transceivers

- 4.16Gbps class serialiser to support high-speed sensors, including Full HD 1080p 2.3MP 60fps and 4MP 30fps imagers

- D-PHY v1.2 and CSI-2 v1.3 compliant system interface

- Up to 4 data channels at 832Mbps per channel

- Supports up to four virtual channels

- Precision multi-camera clocking and synchronisation

- Flexible programmable output clock generator

- Advanced data protection and diagnostics including CRC data protection, sensor data integrity checking, I2C write protection, voltage and temperature measurements, programmable alarms, and line fault detection

- Supports single-ended coaxial or shielded twisted pair (STP) cables

- Ultra-low latency bi-directional I2C and GPIO control channels support ISP control from the ECU side

- 1.8V single supply

- Low power consumption (0.28W typical)

Applications

- Advanced Driver Assistance Systems (ADAS)

- Surround view system ECU

- Front and rear cameras

- Driver monitoring

- Radar ECUs

- Mechanical Scanning Lidar

- Time-of-flight (ToF) cameras

- Analogue security cameras

- MRI, ultrasound and X-ray systems

- Specialised imaging systems

If you have any request, please call Mr Chen:

Tel: +86 13410018555

Email: sales@hkmjd.com

Website: www.hkmjd.com