Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

NXP PN7150B0HN High-Performance NFC Controller For Smart Devices

Product Description Of PN7150B0HN

PN7150B0HN is a full NFC controller solution with integrated firmware and NCI interface designed for contactless communication at 13.56 MHz. It is compatible with NFC forum requirements.

These NFC controllers support the most popular platforms, Raspberry Pi®, BeagleBone® Black and any boards featuring an Arduino® stackable header, including Kinetis®, LPCXpresso and i.MX boards.

Specification Of PN7150B0HN

Operating Frequency:13.56 MHz

Maximum Operating Temperature:+ 85 C

Minimum Operating Temperature:- 30 C

Package/Case:HVQFN-40

Function:Read

Moisture Sensitive:Yes

Unit Weight:95.253 mg

Features Of PN7150B0HN

Full hardware and software compatibility

Support for Linux, Android, RTOS and NullOS

Interface to Raspberry Pi, BeagleBone Black, and all boards with Arduino®-compatible header

All NFC operating modes

Read/Write Mode: ISO/IEC 14443 A and B up to 848 kbit/s, FeliCa at 212 and 424 kbit/s, MIFARE Classic with 1K, 4K, NFC Forum type 1, 2, 3, 4, 5 tags, ISO/IEC 15693

All peer-to-peer modes

Card Emulation Mode (from host): NFC Forum T4T (ISO/IEC 14443 A and B) at 106 kbit/s, NFC Forum T3T

Flexible host interface

Supply voltage: 1.8 to 3.3 V

I²C interface: 3.4 Mbit/s

NCI 1.0-compliant protocol

IRQ signal for improved synchronization

Complete, power-efficient NFC control

RF driver: 3.0 to 4.75 V, 180mA max

Implemented according to device requirements v1.3

Fully configurable polling loop with low-power mode

Load modulation scheme: active

Key Benefits Of PN7150B0HN

Seamless integration of NFC into any application, especially those with OS systems

Plug-and-play NFC operation with many platforms, including most LPC, QorIQ®, Kinetis and i.MX boards

All typical NFC use cases, including pairing, personalization, extended user interface, maintenance, etc

Fast deployment of advanced, fully interoperable NFC functionality, with a lower overall cost

Applications Of PN7150B0HN

All devices requiring NFC functionality especially those running in an Android or Linux environment

TVs, set-top boxes, blu-ray decoders, audio devices

Home automation, gateways, wireless routers

Home appliances

Wearables, remote controls, healthcare, fitness

Printers, IP phones, gaming consoles, accessories