(ADI Ethernet) ADIN1200BCP32Z, ADIN1200CCP32Z Low power, single port 10/100 Ethernet transceiver

Product Classification

Latest Information: Company Dynamics; Industry Information

Home /Company Dynamics /

(ADI Ethernet) ADIN1200BCP32Z, ADIN1200CCP32Z Low power, single port 10/100 Ethernet transceiver

Source:本站Time:2023-06-21Views:

Product Details:The ADIN1200 10/100 Industrial Ethernet PHY is a powerful low-power single-port 10/100 Ethernet transceiver with industry-leading latency specifications designed primarily for industrial Ethernet applications. The design integrates an …

Product Details:

The ADIN1200 10/100 Industrial Ethernet PHY is a powerful low-power single-port 10/100 Ethernet transceiver with industry-leading latency specifications designed primarily for industrial Ethernet applications. The design integrates an energy-efficient Ethernet PHY core with all associated common analog circuits, input and output clock buffers, management interfaces and subsystem registers, and MAC interfaces and control logic to manage reset and clock control, as well as pin configuration.

规格1.png

The ADIN1200 comes in a 5 mm x 5 mm, 32-pin pin architecture chip level package (LFCSP), and can be powered by a 3.3V single power supply assuming a 3.3V MAC interface power supply. For maximum system-level design flexibility, management data input/output (MDIO) and MAC interface supply voltages can be configured with a separate VDDIO power supply, regardless of another circuit on the ADIN1200 and operating at 1.8V, 2.5V or 3.3V. When powered on, the ADIN1200 remains in the hardware reset state until each power supply has exceeded its minimum rise threshold and the power supply is good. Power failure protection is provided by monitoring the power supply to detect if one or more power supply voltages are below the minimum drop threshold and keeping the device in the hardware reset state until the power is restored and meets the power reset (POR) circuit requirements.

The MII management interface (also known as the MDIO interface) provides a two-wire serial interface between the host processor or MAC and the ADIN1200 to access control and status information in the PHY kernel management register. The interface is compatible with IEEE® 802.3™ standard Articles 22 and 45 management frame structures.

The ADIN1200 can support up to 180 meters of cable.

Technical parameter

Type: Transceiver

Protocols: Ethernet, IEEE 802.3, MII, RMII, PHY2

Number of drivers/receivers: 4/4, 1/1

Duplex: full, half

Data rate: 10Mbps, 100Mbps

Voltage - power supply: 1.71V ~ 1.89V, 2.25V ~ 2.75V, 3.14V ~ 3.46V

Operating temperature: -40°C ~ 85°C (ADIN1200BCP32Z)

Operating temperature: -40°C ~ 105°C (ADIN1200CCP32Z)

Mounting type: Surface mount type

Package/housing: 32-WFQFN bare pad, CSP