Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

The NXP PN7150B0HN NFC solution is suitable for rapid design and is fully compliant with NFC Forum standards, including Linux® and Android™ drivers and supports NCI 1.0 host communication. The latest supported Android version is Android 11. For higher Android versions, use the PN7160.

Features

Complete hardware and software compatibility

Supports Linux, Android, real-time operating systems and NullOS.

Interface to Raspberry Pi, BeagleBone Black, and all boards compatible with Arduino® connectors

Full NFC operating modes

Read/write modes: ISO/IEC 14443 A&B up to 848kbit/s, FeliCa at 212 & 424kbit/s, MIFARE Classic (1K, 4K), NFC Forum type 1, 2, 3, 4, 5 tags according to ISO/IEC 15693

All peer-to-peer modes

Card emulation mode (from host): NFC Forum T4T (ISO/IEC 14443 A&B) at 106kbit/s, NFC Forum T3T (FeliCa, PN7150 only)

Flexible host interface

Supply voltage: 1.8 to 3.3V

I²C interface: 3.4 Mbit/s

NCI 1.0 compliant protocol

Improved synchronised IRQ signals

Complete energy-efficient NFC control

RF driver: 3.0 to 4.75V at 180mA max (PN7150); 2.7 to 3.3V at 180mA max (PN7120)

Implemented per device requirement v1.3

Polling cycle in low power mode is fully configurable

Load modulation scheme: active (PN7150), passive (PN7120)

Standard package: HVQFN40 (PN7150)

Key Benefits

Seamless integration of NFC into any application, especially with an operating system

Plug-and-play NFC operation on many platforms, including most LPC, QorIQ®, Kinetis and i.MX boards

All typical NFC use cases, including pairing, personalisation, extended user interface, maintenance, etc.

Rapid deployment of advanced, fully interoperable NFC functionality, reducing total cost of ownership

PN7150B0HN Specifications

Type: RFID Reader  

Frequency: 13.56MHz  

Standards: FeliCa, ISO 14443, ISO 15693, Mifare, NFC  

Interface: I2C, UART  

Voltage - Supply: 2.3V ~ 5.5V  

Operating Temperature: -30°C ~ 85°C (TA)  

Mounting Type: Surface Mount  

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.