Welcome Here  Shenzhen Mingjiada Electronics Co., Ltd.

The LPC5512JBD100E microcontrollers (MCUs) are 32-bit Arm® Cortex®-M33 based MCUs designed for general purpose embedded applications.The Arm Cortex-M33 CPU architecture with 150MHz frequency provides a secure foundation for protecting valuable IP and isolating data through Trustzone® technology. This simplifies the design and software development of digital signal control systems with integrated digital signal processing (DSP) instructions. the LPC5512JBD100E MCU meets these security requirements, supporting secure boot, HASH, AES, RSA, UUID, dynamic encryption and decryption, debug authentication and TBSA compliance.

Features

Arm Cortex-M33 core:

Runs at up to 150MHz

TrustZone®, floating point unit (FPU) and memory protection unit (MPU)

Arm Cortex-M33 has a built-in nestable vector interrupt controller (NVIC)

Non-masked interrupt (NMI) input with a choice of interrupt sources

Serial Wire Debugging (SWD) with eight breakpoints and four watchpoints (including serial wire output for enhanced debugging capabilities)

System beat timer

On-chip memory:

Up to 256KB of on-chip Flash program memory with Flash accelerator and 256 bytes of page erase and write

Up to 96KB total SRAM, including 16KB SRAM on the code bus, 64KB SRAM on the system bus (64KB contiguous) and an additional 16KB USB

SRAM on system bus for USB interface or for general use

Power saving mode:

Integrated power management unit (PMU) to minimise power consumption

Low power modes: RAM retention sleep, deep sleep, RAM and CPU0 retention power-down mode and RAM retention deep power-down mode

Configurable wake-up from peripheral interrupts

Micropulse timer running via watchdog oscillator, Real Time Clock (RTC) running via 32.678kHz clock for waking up in sleep and deep sleep modes

Power-on reset (POR)

Under voltage detector (BOD) with independent thresholds for interrupt generation and forced reset

Ultra-efficient 40nm Flash technology:

Over 600 CoreMarks, down to 32uA/MHz

System integration for industrial and IoT markets:

High precision analogue-to-digital converters

CAN-FD for industrial control

High-speed USB with on-chip PHY

Security features:

Arm TrustZone® support

PRINCE module encrypts data written to on-chip flash memory in real time and decrypts encrypted flash memory data when it is read to protect assets

CASPER cryptographic co-processor enables hardware acceleration* for various functions required for certain asymmetric encryption algorithms such as Elliptic Curve Cryptography (ECC)

AES-256 encryption/decryption engine

Secure Hash Algorithm (SHA2) module supports secure boot via dedicated DMA controller

Physical Unclonable Function (PUF) via chip fingerprint on dedicated SRAM

64-bit to 4096-bit - including hardware for key extraction

Unique 128-bit device identification serial number (UUID)

Secure GPIO

True Random Number Generator (TRNG)

Code watchdog

Powered by internal DC-DC converter

1.8V to 3.6V single power supply 

JTAG boundary scan support

Enhanced safety and security with Arm Trustzone-M technology

Fully supported by the MCUXpresso ecosystem

Operating temperature range: -40°C to +105°C 

Available in HLQFP100 package

Typical applications include industrial IoT, industrial automation, building control, security applications, diagnostic equipment, general embedded and consumer electronics.

• 1.Is the inventory and price seen on the platform accurate?

  A: all online goods on the shelves can be ordered online, but considering the large liquidity of spot inventory, it is not possible to achieve 100% accuracy at present. In case of any abnormality, you can contact our company online and give the corresponding solution.

• 2.Are all our products genuine?

  A: our self-supporting products are from cooperative domestic and foreign original factories or authorized agents, and the source can be traced to ensure the original and authentic products.

• 3.Can you provide the qualification certificate of the original factory or agent?

  A: at present, our self-employed brands TI，ST，ADI，NXP，LATTICE，CYPRESS，INFINEON，XILINX and other first-line brands. Other channels are the original factory and agency channels. If necessary, we can communicate and confirm according to the specific brand and model.

• 4.Can I make an inquiry through the company's website?

  A: You can inquire through the website, or by phone and email.

• 5.When can I deliver the goods after placing an order? How long will it take to get there?

  A: the delivery date is marked in most commodity information. You can estimate the delivery time of the commodity according to the delivery date. The specific arrival time depends on the warehouse where the commodity is located and the logistics mode you choose.

• 6.Can the company issue an invoice?

  A: you can issue ordinary invoices for individual users or special VAT invoices for enterprise users.